Industry & Manufacturing - Overview
The Museum's collections document centuries of remarkable changes in products, manufacturing processes, and the role of industry in American life. In the bargain, they preserve artifacts of great ingenuity, intricacy, and sometimes beauty.
The carding and spinning machinery built by Samuel Slater about 1790 helped establish the New England textile industry. Nylon-manufacturing machinery in the collections helped remake the same industry more than a century later. Machine tools from the 1850s are joined by a machine that produces computer chips. Thousands of patent models document the creativity of American innovators over more than 200 years.
The collections reach far beyond tools and machines. Some 460 episodes of the television series Industry on Parade celebrate American industry in the 1950s. Numerous photographic collections are a reminder of the scale and even the glamour of American industry.
"Industry & Manufacturing - Overview" showing 2 items.
Experimental electrodeless compact fluorescent lamp
- Description
- As energy prices soared in the 1970s, General Electric, like other lamp makers, focused research efforts on raising the energy efficiency of electric lamps. One research program conducted by John Anderson at the GE Corporate Research and Development Laboratory in Schenectady, New York, sought to make a small fluorescent lamp that might replace a regular incandescent lamp.
- Most fluorescent lamps, large and small, operate by passing an electric current through a gas between two electrodes. The current energizes the gas that in turn radiates ultraviolet (UV) light. The UV is converted to visible light by a coating of phosphors inside the glass envelope of the lamp. Electrodes are responsible for much of the energy lost in a fluorescent lamp and are usually the part of the lamp that fails. Instead of electrodes, Anderson's design used a donut-shaped, ferrite (an iron oxide compound) to generate an electric field. The field energized the gas.
- He called his design a Solenoidal Electric Field (SEF) lamp. The one seen here is an experimental unit made around 1978. While the lamp worked in the lab, the electronics to control it were expensive and generated heat that needed to be dissipated. As with other electrodeless lamps, radio-frequency interference was a concern. By the early 1980s GE decided to shelve the SEF lamp and market a miniature metal-halide lamp instead. In the late 1990s, however, GE took advantage of the lower cost and higher capability of electronic components and marketed an electrodeless lamp that built on prior work—including the SEF lamp.
- Lamp characteristics: No base. A 1.5" (outside dia.) toroid-shaped ferrite is mounted vertically inside the lamp and held in place by a wire cradle. The conducting wire is insulated with woven nylon and wrapped ten turns around the top of the ferrite. A woven nylon mat is wrapped around the ferrite under the conductor, and another is placed between the conductor and the top-plate of the mount-cradle. A metal lead extends from the bottom of the ferrite into the exhaust-tip where it spirals around a metal cylinder. Tipless, AT-shaped envelope.
- Date made
- ca 1978
- date made
- ca. 1978
- maker
- General Electric Corporate Research & Development Laboratory
- ID Number
- 1998.0050.07
- accession number
- 1998.0050
- catalog number
- 1998.0050.07
- Data Source
- National Museum of American History, Kenneth E. Behring Center
Experimental integral compact fluorescent lamp
- Description
- As energy prices soared in the 1970s, lamp makers focused research efforts on raising the energy efficiency of electric lamps. A great deal of effort by many researchers went into designing small fluorescent lamps that might replace a regular incandescent lamp. These efforts led to modern compact fluorescent lamps that use bent or connected tubes, but many other designs were tried. This experimental "partition lamp" from 1978 shows one such design.
- Soon after the 1939 introduction of linear fluorescent lamps, inventors began receiving patents for smaller lamps. But they found that the small designs suffered from low energy efficiency and a short life-span. Further research revealed that energy efficiency in fluorescent lamps depends in part on the distance the electric current travels between the two electrodes, called the arc path. A long arc path is more efficient than a short arc path. That's why fluorescent tubes in stores and factories are usually 8 feet (almost 3 meters) long.
- Inventors in the 1970s tried many ways of putting a long arc path into a small lamp. In this case there are thin glass walls inside the lamp, dividing it into four chambers. Each chamber is connected in such a way that the electric current travels the length of the lamp four times when moving from one electrode to the other. So the arc path is actually four times longer than the lamp itself, raising the energy efficiency of the lamp. This unit was made by General Electric for experiments on the concept, though other makers were also working on partition lamps.
- While the partition design works, it proved to be expensive to manufacture and most lamp makers decided to use thin tubes that could be easily bent and folded while being made.
- Lamp characteristics: No base. Two stem assemblies each have tungsten electrodes in a CCC-6 configuration with emitter. Welded connectors, 3-piece leads with lower leads made of stranded wire. Bottom-tipped, T-shaped envelope with internal glass partition that separates the internal space into four connected chambers. Partition is made of two pieces of interlocked glass and is not sealed into the envelope. All glass is clear. No phosphors were used since the experimenter wanted to study the arc path.
- Date made
- ca 1978
- date made
- ca. 1978
- maker
- General Electric Corporate Research & Development Laboratory
- ID Number
- 1998.0050.16
- accession number
- 1998.0050
- catalog number
- 1998.0050.16
- Data Source
- National Museum of American History, Kenneth E. Behring Center