Measuring & Mapping - Overview

Where, how far, and how much? People have invented an astonishing array of devices to answer seemingly simple questions like these. Measuring and mapping objects in the Museum's collections include the instruments of the famous—Thomas Jefferson's thermometer and a pocket compass used by Meriwether Lewis and William Clark on their expedition across the American West. A timing device was part of the pioneering motion studies of Eadweard Muybridge in the late 1800s. Time measurement is represented in clocks from simple sundials to precise chronometers for mapping, surveying, and finding longitude. Everyday objects tell part of the story, too, from tape measures and electrical meters to more than 300 scales to measure food and drink. Maps of many kinds fill out the collections, from railroad surveys to star charts.
"Measuring & Mapping - Overview" showing 105 items.
Page 1 of 11
- No Image Available
Worthington-Gamon Water Meter
- Description
- This is a disc water meter, serial number 3,783,592, made by the Worthington-Gamon Meter Company in Newark, N. J. It has been cut away to show the operating parts. It was made after 1941 when the firm boasted that 3,650,000 of its meters were then serving thousands of communities.
- Ref: Worthington-Gamon ad in Journal of the American Water Works Association 33 (Nov. 1941), ad section, p. 5.
- date made
- early 1940s
- maker
- Worthington-Gamon Meter Company
- ID Number
- PH*315359
- accession number
- 219306
- catalog number
- 315359
- Data Source
- National Museum of American History, Kenneth E. Behring Center
- No Image Available
Worthington-Gamon Water Meter
- Description
- This is a disc water meter, serial number 3,786,593, made by the Worthington-Gamon Meter Company in Newark, N. J. It has been cut away to show the operating parts. It was made after 1941 when the firm boasted that 3,650,000 of its meters were then serving thousands of communities.
- Ref: Worthington-Gamon ad in Journal of the American Water Works Association 33 (Nov. 1941), ad section, p. 5.
- date made
- early 1940s
- maker
- Worthington-Gamon Meter Company
- ID Number
- PH*315360
- accession number
- 219306
- catalog number
- 315360
- Data Source
- National Museum of American History, Kenneth E. Behring Center
- No Image Available
Hersey H.F. Water Meter
- Description
- This is a disc meter made by the Hersey Manufacturing Company in Boston, Mass. Hersey introduced the form in 1919, and described it as a “positive displacement meter of the nutating type” that was “adapted for use on all services where extreme accuracy, reliability and durability are required and where general efficiency rather than first cost is of prime importance.” The serial number (1,669,637) on this example dates from 1936. The case has been partially cut away to show the mechanism.
- Ref: Hersey Disc Water Meter. Model H.F. Meter (July 1, 1926).
- date made
- 1936
- maker
- Hersey Manufacturing Company
- ID Number
- PH*319448
- accession number
- 238754
- catalog number
- 319448
- Data Source
- National Museum of American History, Kenneth E. Behring Center
- No Image Available
Badger CI-IOX Water Meter
- Description
- This is a disc water meter made by the Badger Meter Manufacturing Company in Milwaukee, Wisc. It has a frost-proof bottom, fits a ⅝” pipe, and has a capacity of 26 gallons per minute. The serial number (2,335,475) dates from 1942.
- date made
- ca 1942
- maker
- Badger Meter Manufacturing Company
- ID Number
- PH*325801
- accession number
- 245003
- catalog number
- 325801
- Data Source
- National Museum of American History, Kenneth E. Behring Center
- No Image Available
Badger CC Water Meter
- Description
- This is a disc water meter made by the Badger Meter Manufacturing Company in Milwaukee, Wisc. It fits a ⅝” pipe and has a capacity of 26 gallons per minute. The serial number is no longer legible.
- According to the firm, this meter was “so constructed that the current of water completely fills the receptacle both above and below the measuring mechanism. The entire chamber is thus constantly flushed, preventing the secretion of sediment which might injuriously affect the working of the meter, or the unsanitary stagnation of water in a blind pocket.” The frost-proof bottom is a “plate of soft gray cast iron thoroughly galvanized and rust proof, with a low breaking strength of 600 pounds.” If the water in the meter should freeze, the bottom plate would break, “thus relieving all strain long before the pressure has reached a point where it is dangerous to the interior parts.”
- Ref: Badger Meter Manufacturing Company, Badger Water Meters<\i> (about 1925)
- date made
- ca 1904-ca 1960
- maker
- Badger Meter Manufacturing Company
- ID Number
- PH*325803
- accession number
- 245003
- catalog number
- 325803
- Data Source
- National Museum of American History, Kenneth E. Behring Center
- No Image Available
Badger SC-IOT Water Meter
- Description
- This is disc water meter was made by the Badger Meter Manufacturing Company in Milwaukee, Wisc. It fits a ⅝” pipe, has a capacity of 26 gallons per minute, and was designed for use with corrosive waters. SC-IOT refers to a split case, interchangeable oil gear train. The serial number (2,636,483) dates from 1946.
- date made
- ca 1946
- maker
- Badger Meter Manufacturing Company
- ID Number
- PH*325804
- accession number
- 245003
- catalog number
- 325804
- Data Source
- National Museum of American History, Kenneth E. Behring Center
- No Image Available
Badger SC-SOT Water Meter
- Description
- This disc water meter was made by the Badger Meter Manufacturing Company in Milwaukee, Wisc. SC-SOT stands for split case, sealed oil gear train.The split case could be used in warmer climates where there was no danger of freezing. It fits a ⅝” pipe, has a capacity of 26 gallons per minute, and was designed for use with corrosive waters. The serial number (828,438) dates from 1929.
- date made
- ca 1929
- maker
- Badger Meter Manufacturing Company
- ID Number
- PH*325806
- accession number
- 245003
- catalog number
- 325806
- Data Source
- National Museum of American History, Kenneth E. Behring Center
- No Image Available
Badger A-SOT Water Meter
- Description
- This disc water meter was made by the Badger Meter Manufacturing Company in Milwaukee, Wisc. It fits a ⅝” pipe, and has a capacity of 26 gallons per minute. It has a frost-proof bottom, and could be used with corrosive waters. There is no serial number. A-SOT refers to sealed oil gear train.
- date made
- ca 1904-ca 1960
- maker
- Badger Meter Manufacturing Company
- ID Number
- PH*325807
- accession number
- 245003
- catalog number
- 325807
- Data Source
- National Museum of American History, Kenneth E. Behring Center
- No Image Available
Badger JET Water Meter
- Description
- This turbine water meter was made by the Badger Meter Manufacturing Company in Milwaukee, Wisc. It has a split case and so could be used in areas where water did not normally freeze. The serial number (1,217,214) dates from 1934.
- date made
- ca 1934
- maker
- Badger Meter Manufacturing Company
- ID Number
- PH*325808
- accession number
- 245003
- catalog number
- 325808
- Data Source
- National Museum of American History, Kenneth E. Behring Center
- No Image Available
Badger Water Meter with Magnetic Drive
- Description
- This turbine water meter was made by the Badger Meter Manufacturing Company in Milwaukee, Wisc. The serial number (1,889,599 ) dates from 1940. According to the donor, the first Badger magnetic-drive meters built on a production line basis were not introduced until the late 1950s. This example was probably specially built for an individual customer. Research on magnetic-drive motors began in the 1930s.
- date made
- ca 1940
- maker
- Badger Meter Manufacturing Company
- ID Number
- PH*325809
- accession number
- 245003
- catalog number
- 325809
- Data Source
- National Museum of American History, Kenneth E. Behring Center

