Parallel Rules

Parallel rules help draftsmen, surveyors, cartographers, architects, and navigators draw accurate parallel lines. The instrument comes in two main forms: two rectangular straight edges connected by brass or silver hinges, or a single frame surrounding a roller. The first type was known in Europe by 1600, while Englishman A. George Eckhardt is credited with inventing the second in 1771. The parallel rule was superseded for most uses by the T-square in the 19th century, but navigators continue to use parallel rules in conjunction with gridded charts.

The mathematics collections contain about twenty parallel rules and combination instruments, dating from the late 18th century to the late 20th century and ranging in length from 6 to 24 inches. The objects are made from ebony and other woods, brass, German silver, and plastic. They were manufactured in the United States, England, Italy, and Taiwan. They were used for military surveying, in navigation, in business, in art and technical drawing, and for placing handles on caskets. Several of the objects in this group illustrate innovations added to the basic instrument.

Acknowledgement

The digitization of this group of artifacts was made possible through the generous support of Edward and Diane Straker.

This ebony ruler has ivory edges divided to 1/12" and numbered by ones from 1 to 6. Ivory rollers at each end of the ruler's interior are numbered by sixes from 6 to 18 and within brass housings.
Description
This ebony ruler has ivory edges divided to 1/12" and numbered by ones from 1 to 6. Ivory rollers at each end of the ruler's interior are numbered by sixes from 6 to 18 and within brass housings. The rollers are connected by a metal rod that runs through a brass and paper counting dial numbered by ones from 1 to 12. A metal pointer or index attached to this dial shows the number of inches the rule has rolled. The rod is covered with ebony. The right end of the rule is marked: DOLLOND (/) LONDON. A wooden case is covered with black leather and lined with green velvet.
The Dollond family began to make eyeglasses, telescopes, and scientific instruments in London in the mid-18th century. A. George Eckhardt invented a rolling parallel ruler in 1771 and gave the patent to the firm. In the late 18th century, brothers and partners Peter and John Dollond advertised four forms of parallel rulers: an ebony rule with unnumbered brass rollers; a rule adding ivory scales on the rollers; a rule adding ivory scales along the edges; and a rule adding the measuring dial with index. This object is a 6" example of the fourth type of rule and sold for 1 pound, 6 shillings. The firm merged with Aitchison & Co. in 1927 and was purchased by Boots Opticians in 2009.
References: Deborah J. Warner, “Browse by Maker: Dollond,” National Museum of American History Physical Sciences Collection: Surveying and Geodesy , http://amhistory.si.edu/surveying/maker.cfm?makerid=10; Maya Hambly, Drawing Instruments: 1580–1980 (London: Sotheby's Publications, 1988), 111–113; A Catalogue of Retail Prices of Optical, Mathematical and Philsophical Instruments made by P. and J. Dollond, Opticians to His Majesty in St. Paul's Church-Yard and St. James Haymarket (London, [1780–1805]); accession file.
Location
Currently not on view
date made
late 18th century
maker
Dollond
ID Number
MA.323499
catalog number
323499
accession number
250508
This 6" ebony instrument has three blades, apparently cut from a single rectangle of wood, and is held together by intricate brass hinges.
Description
This 6" ebony instrument has three blades, apparently cut from a single rectangle of wood, and is held together by intricate brass hinges. Surveyors, cartographers, navigators, and draftsmen began using parallel rules in the 18th century to easily draw parallel lines separated by various widths. These instruments were also used for reducing or enlarging scaled drawings.
According to the donor, the rule was brought to this continent by Alexander Matheson (1788–1866), an English officer who brought troops from the West Indies to fight against the Americans in the War of 1812. After the war, he helped build the Rideau Canal and settled near Perth, Ontario. His grandson, Alexander Matheson Richey (1826–1913), a lumberman who moved to Chicago, also used the instrument.
References: Maya Hambly, Drawing Instruments: 1580–1980 (London: Sotheby's Publications, 1988), 111; Ken W. Watson, "Smiths Falls Locks 28–31," Rideau Canal World Heritage Site, http://www.rideau-info.com/canal/history/locks/h28-31-smithsfalls.html; "The Town of Perth: The Settlement of Retired Military Heroes on 'the Scotch Line,'" Toronto Daily Mail (May 14, 1887), 6–7, 10; accession file.
Location
Currently not on view
date made
early 19th century
ID Number
MA.321753
catalog number
321753
accession number
243754
A 14" trapezoidal mahogany frame with metal end pieces covers two mahogany rollers that rotate on metal shafts. A paper label is marked: CARRINGTON'S PATENT PARALLEL RULER, FOR COUNTING HOUSES, &C. The label is decorated with an eagle over a shield with arrows in its claws.
Description
A 14" trapezoidal mahogany frame with metal end pieces covers two mahogany rollers that rotate on metal shafts. A paper label is marked: CARRINGTON'S PATENT PARALLEL RULER, FOR COUNTING HOUSES, &C. The label is decorated with an eagle over a shield with arrows in its claws. The eagle's beak holds a banner marked: E PLURIBUS UNUM.
On April 14, 1832, James Carrington of Wallingford, Conn., patented a parallel ruler that was later manufactured by William Hill of Wallingford. The rollers were raised in order to prevent ink from smearing as the ruler was moved across a drawing. In 1849 the U.S. House of Representatives ordered six dozen of the rulers from R. Farnham, a stationer in Washington, D.C., for $2.30 per dozen. This suggests the rules were used relatively widely for a significant period of time. Before he built a dam and factory in Wallingford around 1830, Carrington was a supervisor and inspector at the Harpers Ferry and Springfield armories.
References: "American Patents," The Repertory of Patent Inventions 15 (1833): 24; "Power, Factories, Invention," in Centennial of Meriden: June 10–16, 1906 (Meriden, Conn.: Journal Publishing Co., 1906), 245; U.S. House of Representatives, Contracts for Stationery, 31st Congress, 1st Session, Miscellaneous, No. 16, December 31, 1849 (Washington, D.C., 1850), 16–17; Hiram Williams Beckwith, History of Montgomery County, Together With Historic Notes on the Wabash Valley (Chicago, 1881), 246; Merritt Roe Smith, Harpers Ferry Armory and the New Technology (Cornell: University Press, 1977), 203, 207, 229.
Location
Currently not on view
date made
mid 19th century
patentee
Carrington, James
ID Number
MA.293320.2818
accession number
293320
catalog number
293320.2818
This ten-inch German silver instrument has two rollers connected by a shaft. Both ends have knobs to hold while rolling the parallel rule. Both long edges have centimeter scales, divided to millimeters and numbered by ones from 0 to 24.
Description
This ten-inch German silver instrument has two rollers connected by a shaft. Both ends have knobs to hold while rolling the parallel rule. Both long edges have centimeter scales, divided to millimeters and numbered by ones from 0 to 24. The instrument is marked: "LA FILOTECNICA" MILANO. A wooden case is lined with dark blue velvet and has ornate brass clasps. The bottom of the case is marked in red pencil: S_301 £ £ £.
Ignasio Porro (1801–1875) established La Filotecnica in Milan in 1865 to train students to make optical and mathematical instruments. Between 1870 and 1877, one of his apprentices, Angelo Salmoiraghi (1848–1939), purchased the firm and put more emphasis on manufacturing. By 1906 the company was renamed Filotecnica Salmoiraghi.
References: Paolo Brenni, "Italian Scientific Instrument Makers of the Nineteenth Century and Their Instruments," in Nineteenth-Century Instruments and Their Makers, ed. P. R. de Clercq (Amsterdam: Rodopi B.V., 1985), 196–198; Bill Morris, "A Fine Sextant by Filotecnica Salmoiraghi of Milan," October 5, 2010, The Nautical Sextant, http://sextantbook.com/2010/10/05/a-fine-sextant-by-filotecnica-salmoirhagi-of-milan/.
Location
Currently not on view
date made
ca 1870
maker
Officina Filotecnica
ID Number
1986.0316.04
catalog number
1986.0316.04
accession number
1986.0316
This instrument has a wooden handle attached by a large brass thumbscrew to a brass protractor that is divided to single degrees and numbered by tens in both directions from 10 to 170.
Description
This instrument has a wooden handle attached by a large brass thumbscrew to a brass protractor that is divided to single degrees and numbered by tens in both directions from 10 to 170. The protractor is screwed to a rectangular brass piece that slides in a groove in a rectangular wooden guide-piece. The guide-piece has brass clamps and thumbscrews for affixing the instrument on a table. The protractor is also attached by a split nut to a metal screw shaft that runs the width of the instrument. A thumb rest and gear on the left clamp rotates the screw shaft.
A T-square is a technical drawing instrument used by draftsmen primarily as a guide for drawing horizontal lines on a drafting table. In this instrument, the two blades of the T-square are not fixed in a perpendicular position but rather can be rotated to any angle on the protractor. The large thumbscrew can then be used as a handle to move the blades along the screw shaft, allowing the user to draw parallel lines.
Eugene James Towne (1847–after 1900) of North Dana, Mass., received a patent for this device in 1877. He submitted this example with his application as a prototype for the instrument, and the U.S. Patent Office marked it on the bottom: 187330 (/) L.1201.1228. Towne, a cabinetmaker, and J. W. Goodman, who made pianos, billiard table legs, and other wooden items in North Dana, apparently intended to manufacture the device together. However, the instrument likely was not widely adopted.
References: Eugene J. Towne, "Improvement in Parallel Rulers" (U.S. Patent 187,330 issued February 13, 1877); Edwin Eugene Towne, ed., The Descendants of William Towne (Newtonville, Mass., 1901), 284; The Worcester County Directory for 1878–79 (Boston: Briggs & Co., 1878), 41; 1870 and 1900 U.S. Census records.
Location
Currently not on view
date made
1877
maker
Towne, Eugene J.
ID Number
MA.308953
catalog number
308953
accession number
89797
One rule is 24" long and is held together by corroded brass hinges. The blades may be solid ebony. Small metal buttons in the center of each blade assist with positioning the instrument.
Description
One rule is 24" long and is held together by corroded brass hinges. The blades may be solid ebony. Small metal buttons in the center of each blade assist with positioning the instrument. This rule has no identifying markings.
The second rule is 18" long and is held together by nickel plated brass hinges. The blades are made of ebonized boxwood. Two metal knobs at the center of each blade are used to position the instrument. On the left of the knob on the top blade is marked: KEUFFEL & ESSER CO (/) N.Y. Below the knob is marked: 1784. On the right of the knob is marked: TRADEMARK (below the K&E lion logo). The bottom blade is marked: PAT. JUNE 1, 1915.
By 1880 Keuffel & Esser of New York imported ebony parallel rules with brass hinges and positioning buttons, selling the 24" size as model 706 for $2.00. By 1890 the firm was also making its own version of the rules, since the imported wood, which was often grown in Africa, warped and shrank in the climate of the United States. The imported rules were sold as model numbers 1790 (6", 35¢) through 1795 (24", $1.75). K&E stopped selling imported ebony rules in 1909. Rules manufactured at the company's factory in Hoboken, N.J., from hardwoods stained black were sold as model numbers 1780 through 1785. The 18" model 1784 was priced at $1.25 in 1890 and $1.50 in 1913. The company discontinued this product line after 1936, when model 1784 sold for $2.50.
The first rule thus dates to between 1880 and 1909. Charles Christ Pfeiffer (b. 1874) received the patent mentioned on the second rule, for replacing one of the rivets securing one of the hinges with an adjustable screw. He emigrated from Germany as a child and worked as a cabinetmaker and foreman in Hoboken, possibly for K&E since he assigned the patent to the company. In the 1920s Pfeiffer moved to New London, Conn., where he purchased a farm in the 1930s. The second rule dates to between 1915 and 1936.
References: Catalogue of Keuffel & Esser Co., 13th ed. (New York, 1880), 115; Catalogue of Keuffel & Esser Co., 21st ed. (New York, 1890), 133; Catalogue of Keuffel & Esser Co., 33rd ed. (New York, 1909), 201, 223; Catalogue of Keuffel & Esser Co., 34th ed. (New York, 1913), 197; Catalogue and Price List of Keuffel & Esser Co., 36th ed. (New York, 1921), 144; Catalogue of Keuffel & Esser Co., 38th ed. (New York, 1936), 228; Charles C. Pfeiffer, "Parallel Ruler" (U.S. Patent 1,141,483 issued June 1, 1915); 1900–1940 U.S. Census records; World War I Draft Registration Cards, 1917–1918.
Location
Currently not on view
date made
1880-1936
maker
Keuffel & Esser Co.
ID Number
MA.333946
catalog number
333946
accession number
296611
This 18" brass instrument has rollers mounted 2-5/8" from each end and connected by a shaft with a brass cover. Both ends have knobs to hold while rolling the parallel rule over a drawing. The center top of the base is marked: KEUFFEL & ESSER Co (/) NEW YORK.
Description
This 18" brass instrument has rollers mounted 2-5/8" from each end and connected by a shaft with a brass cover. Both ends have knobs to hold while rolling the parallel rule over a drawing. The center top of the base is marked: KEUFFEL & ESSER Co (/) NEW YORK. The center bottom is marked: 1758. A plain wooden box has a sliding lid that is marked: Parallel (/) Rule 3. It is also marked: 18". It is also marked (facing the other direction): R. The side of the box is marked: Rolling Parallel Rule K & E – 1758 – 18".
Keuffel & Esser began to sell model number 1758 between 1881 and 1890, but there was no brass cover over the shaft and the instrument weighed only 40 oz. Between 1899 and 1906, K&E introduced the cover. The rule then weighed 54 oz. and sold for $12.00. In 1927, the company began to offer the instrument in a case covered with synthetic leather instead of in a plain wooden box.
References: Catalogue of Keuffel & Esser Co., 21st ed. (New York, 1890), 132; Catalogue of Keuffel & Esser Co., 30th ed. (New York, 1899), 196; Catalogue and Price List of Keuffel & Esser Co., 32nd ed. (New York, 1906), 211; Catalogue of Keuffel & Esser Co., 37th ed. (New York, 1927), 217.
Location
Currently not on view
date made
1900–1927
maker
Keuffel & Esser Co.
ID Number
1996.0005.01
catalog number
1996.0005.01
accession number
1996.0005
This clear plastic ruler has two aluminum hinges and small positioning knobs that may be tightened or loosened. The lower left and upper right corners of the blades are marked: 18". The hinges are marked: THE C-THRU RULER CO. (/) BLOOMFIELD, CONN. U.S.A.
Description
This clear plastic ruler has two aluminum hinges and small positioning knobs that may be tightened or loosened. The lower left and upper right corners of the blades are marked: 18". The hinges are marked: THE C-THRU RULER CO. (/) BLOOMFIELD, CONN. U.S.A. Six circular slices of cork on the bottom of the instrument protect the surface on which it is used.
Teacher Jennie Zachs established the C-Thru Ruler Company of Hartford, Conn., in 1939. Although the firm was acquired by Acme United Corporation in 2012, it continues to make drafting tools and drawing instruments, including an aluminum version of this instrument. For other C-Thru products, see 1984.1071.12 and 1988.0807.02.
References: Brian Dowling, "Acme United Acquires Bloomfield's C-Thru Ruler," Hartford Courant, June 11, 2012; "About Us," C-Thru Ruler Company, http://www.cthruruler.com/.
Location
Currently not on view
date made
mid 20th century
maker
C-Thru Ruler Company
ID Number
1990.3130.01
catalog number
1990.3130.01
nonaccession number
1990.3130

Our collection database is a work in progress. We may update this record based on further research and review. Learn more about our approach to sharing our collection online.

If you would like to know how you can use content on this page, see the Smithsonian's Terms of Use. If you need to request an image for publication or other use, please visit Rights and Reproductions.