Slide RulesLinear Slide Rules
Between 1614 and 1622, John Napier discovered logarithms, Edmund Gunter devised a scale on which numerals could be multiplied and divided by measuring the distance between two logarithmic numbers with a pair of dividers, and William Oughtred put two such scales alongside each other, moving one on a slide so that the distance between the numbers could be read off directly. The speed with which these developments unfolded suggests the power that logarithms provided for reducing the tedium of calculation. By the 1680s, the English used slide rules in carpentry and in gauging (estimating liquid volumes)—the instruments were quite helpful for determining excise taxes on barrels of liquor.
It was not until the late eighteenth century that slide rules were commonly utilized in the manufacture of machines and machine tools, most notably by James Boulton and James Watt. Several more decades passed before slide rule use became widespread throughout Europe. French artillery officer Amedée Mannheim fostered acceptance of the rectangular or linear form of the instrument in 1851 by standardizing the general types of scales and the order in which the scales were arranged. Mannheim also developed the cursor or indicator, which made it easier to read results from two scales that were not adjacent to each other. By the 1870s, German companies made slide rules one of the first consumer products to be fashioned out of plastic (specifically, sheets of celluloid laminated to a wooden frame), and they built dividing engines that permitted mass production of the scales engraved on slide rules. In the United States in the 1890s, Keuffel & Esser of New York City pioneered first the import and then the domestic manufacture of linear slide rules. Numerous other companies entered the market in the 20th century.
A quick tour of what you can expect to see on a slide rule starts with the C and D scales, which both represent the standard number line. To multiply two numbers, set the 1 on the C scale above the first number to be multiplied on the D scale. Look at the second number to be multiplied on the C scale; the number below it on the D scale is the answer. For example, to multiply 2 by 3, set 1 on C over 2 on D, and then look below 3 on C to see the answer 6 on D. Division is accomplished by reversing the process. To calculate 6 ÷ 3, set 3 on C over 6 on D, then look at 1 on C to see the answer 2 on D. To deal with numbers larger than 10 or smaller than 1, the user must mentally move the decimal point. Slide rule users also had to be able to estimate distances between marks on the scales, since there was no way to include all of the digits needed to solve a problem such as 3.14 X 2.7. (On linear and circular slide rules, the answer is "approximately 8.48." Web sites on the Resources page provide more detailed training in using slide rules.)
|Instructions for multiplying two numbers on a slide rule. Eugene Dietzgen Co., Self-teaching Instruction Manual [for] Maniphase Slide Rule (Chicago, [1950s]), 4. NMAH Mathematics Collection, cat. no. 1988.0367.02. AHB2013q009216|
The basic process for setting up and solving problems is the same for operations on other scales. If the numbers used in the calculation produce a result off the ends of the scales, a user employs the CI and DI scales, which put the number line in inverse, or reverse, order. If the numbers still extend past the end of the instrument, the user may try the "folded" CF and DF scales, which start numbering at π instead of at 1. The A and B scales are number lines of squares, so they are used with the C or D scales to square (or take the square root of) a number. The K scale provides cubes and cube roots. L scales represent common logarithms, S scales give sines and cosines, and T scales indicate tangents.
"Slide Rules - Linear Slide Rules" showing 1 items.
- This large mahogany linear astronomical slide rule is covered with strips of German silver. There are two slides, each of which have scales on both sides. Each slide has a knob near one end for moving it; these may be unscrewed and attached on the reverse side. One slide is marked COLLIMATION on one side and AZIMUTH on the other. The other slide is marked LEVEL AZIMUTH on one side and REFRACTION on the other. The base has four identical, unlabeled logarithmic scales, each of which runs from 1 to 10 twice (with a bit more at each end).
- On the center portion of the base, the instrument is marked Darling Brown & Sharpe Providence R.I. Darling, Brown & Sharpe did business under that name from 1866 to 1892. For additional company history, see 1977.0460.01. According to records of the United States Naval Observatory, this slide rule was purchased for $154.00 in December 1887. Few slide rules specifically for astronomy survive, so these large and expensive objects were probably not widely used. Compare to two late 19th-century rules held by the Powerhouse Museum, http://www.powerhousemuseum.com/collection/database/?irn=233017.
- Reference: Ledger of Instruments Purchased by the U.S. Naval Observatory, ca. 1845–1906, United States Naval Observatory, Washington, D.C.
- Currently not on view
- date made
- Darling, Samuel
- Brown & Sharpe Manufacturing Company
- ID Number
- catalog number
- accession number
- Data Source
- National Museum of American History, Kenneth E. Behring Center