Transportation - Overview
Americans have always been a people on the move—on rails, roads, and waterways (for travel through the air, visit the National Air and Space Museum). In the transportation collections, railroad objects range from tools, tracks, and many train models to the massive 1401, a 280-ton locomotive built in 1926. Road vehicles include coaches, buggies, wagons, trucks, motorcycles, bicycles, and automobiles—from the days before the Model T to modern race cars. The accessories of travel are part of the collections, too, from streetlights, gas pumps, and traffic signals to goggles and overcoats.
In the maritime collections, more than 7,000 design plans and scores of ship models show the evolution of sailing ships and other vessels. Other items range from scrimshaw, photographs, and marine paintings to life jackets from the Titanic.
"Transportation - Overview" showing 6 items.
Invention for Signal Lights for Locomotives
- Description (Brief)
- Dick’s improvement in “Signal-Lights for Locomotives” included a combination of a stationary and a moveable headlight which could also identify the train name or number.
- Location
- Currently not on view
- date made
- 1872
- patent date
- 1872-07-23
- inventor
- Dick, Andrew
- ID Number
- DL*331332
- catalog number
- 331332
- patent number
- 129,797
- accession number
- 88881
- Data Source
- National Museum of American History, Kenneth E. Behring Center
New England Whale Ship
- Description
- This model represents a typical Massachusetts whaleship of the mid-19th century, fully rigged and ready for a long cruise that might last for as much as four years. The name “U.S. Grant, Edgartown” on the ship’s stern is fictional—no ship by that name ever sailed for the whaling fleet. The ship’s bottom is lined with copper sheathing, to keep out the teredo navalis, a tropical worm that bored into the wood of ship’s hulls and weakened the structure, as the termite does to wooden structures on land.
- The whaleboats are the most prominent features. After whales were sighted by lookouts perched at the mast tops, the boats were dropped over the sides of the mother ship to chase them. Also over the side are the cutting stages, where the whale’s fat, or blubber, was sliced off the body in long strips.
- The main feature on the ship’s deck is the try-works, or giant pots set into a brick framework, where the whale’s blubber, was boiled down into oil. After the blubber became liquid, it was drawn off to cool and then poured into heavy barrels and stored below in the ship’s cargo hold.
- This model was purchased in 1875 at Edgartown, on the island of Martha’s Vineyard, Mass.; it was one of the first objects in the Smithsonian’s National Watercraft Collection.
- Date made
- 1875
- model was purchased
- 1875
- ID Number
- TR*025726
- catalog number
- 025726
- accession number
- 4353
- Data Source
- National Museum of American History, Kenneth E. Behring Center
Whaler's Mincing Knife
- Description
- Whaling crews used mincing knives to cut the blubber strips into thin slices down to, but not through, the thick whale skin. This process increased the surface area of the blubber and helped it melt faster in the try-pots. Cut in this fashion, the sections of whale blubber and skin were known as “bible leaves” because they resembled the pages of a book.
- date made
- 1876
- collected
- 1876
- ID Number
- AG*025912
- accession number
- 005019
- catalog number
- 025912
- Data Source
- National Museum of American History, Kenneth E. Behring Center
Whaler's Boarding Knife
- Description
- The work of carving blubber from a whale carcass and hauling the long, narrow strips of flesh, called “blanket pieces,” aboard the ship onto the deck was called “boarding.” The boarding knife was an extremely sharp, double-edged sword blade at the end of a short wooden pole. It served a variety of purposes, from cutting a hole in the whale’s flesh for the blubber hook, to cutting the long strips of flesh into shorter sections for further processing.
- These tools were kept extremely sharp to cut the whale’s flesh easily. With the decks and tools so slippery from the whale processing, using them was reserved for the ship’s officers.
- date made
- 1876
- collected
- 1876
- ID Number
- AG*026608
- catalog number
- 026608
- accession number
- 4927
- Data Source
- National Museum of American History, Kenneth E. Behring Center
USS Alaska Scrimshaw Sperm Whale Tooth
- Description
- The wooden screw sloop of war USS Alaska was built in 1868 and spent much of her career in the southern Pacific and Far East representing the American nation in foreign ports. In June 1878, she cleared New York for San Francisco and stopped at several South American ports on the way.
- One of Alaska's port calls from 20-29 September 1878 was to Talcahuano, in the center of Chile's coast and that nation's main naval port. It also was one the principal stops for American whalers in the Pacific seeking fresh supplies and entertainment. This massive sperm whale's tooth was probably purchased there and engraved by one of Alaska's crew to commemorate his visit. While the carver of this tooth is unknown, it may have been one of the officers who kept the official ship's logbooks, because the calligraphy on the covers of the logs for this voyage is exceptionally elaborate and colorful.
- As this tooth indicates, the Talcahuano visit and liberty calls were memorable. Sent ashore on liberty, 54 of Alaska's crew went AWOL (Absent WithOut Leave), and three more were confined to double irons (feet and hand cuffs) for drunk and boisterous behavior or fighting.
- Date made
- 1878
- USS Alaska port call to Chile, Talcahuano
- 1878-09
- ID Number
- DL*374477
- catalog number
- 374477
- accession number
- 136263
- Data Source
- National Museum of American History, Kenneth E. Behring Center
Rigged Model, Sidewheel Cotton Packet J.M. White
- Description
- The Mississippi River sidewheel steamboat J.M. White was built at Jeffersonville, Ind., in 1878 for the Greenville and New Orleans Packet Company. Measuring 321’ long and 91’ in beam across the paddlebox guards, the White only sat 10’-6” deep in the water when fully laden. The steamboat was designed for Mississippi River packet service between New Orleans, La., and Greenville, Miss.
- The White was one of the largest, most expensive, luxurious, and most powerful river steamers ever built, with 2,800 horsepower and a capacity of 250 first-class passengers and 10,000 bales of cotton. Named after famous riverboat captain J. M. White (1823–1880), the “supreme triumph in cotton boat architecture” was a masterpiece of the gaudy, glamorous style known as “steamboat Gothic.” It had multiple bridal chambers; stained glass skylights and windows; rare wood veneers and gilded finishes; seven gilded “Egyptian-style” chandeliers; a sterling silver Tiffany water cooler in the 250’-long main cabin; monogrammed flatware and china; and a full concert grand piano.
- The White spent most of its eight-year career in service on the Mississippi River between New Orleans and Vicksburg, Miss. Despite its economy of size, the White’s high initial $220,000 cost, a spotty economy, and the rapidly expanding railroad network made the steamboat unprofitable. It caught fire, blew up, and burned to the waterline at a Louisiana landing in December 1886, killing several aboard.
- Date made
- 1974
- built
- 1878
- used date
- late 19th century
- ID Number
- TR*334847
- catalog number
- 334847
- accession number
- 315419
- Data Source
- National Museum of American History, Kenneth E. Behring Center