Transportation - Overview
Americans have always been a people on the move—on rails, roads, and waterways (for travel through the air, visit the National Air and Space Museum). In the transportation collections, railroad objects range from tools, tracks, and many train models to the massive 1401, a 280-ton locomotive built in 1926. Road vehicles include coaches, buggies, wagons, trucks, motorcycles, bicycles, and automobiles—from the days before the Model T to modern race cars. The accessories of travel are part of the collections, too, from streetlights, gas pumps, and traffic signals to goggles and overcoats.
In the maritime collections, more than 7,000 design plans and scores of ship models show the evolution of sailing ships and other vessels. Other items range from scrimshaw, photographs, and marine paintings to life jackets from the Titanic.
"Transportation - Overview" showing 6 items.
Rigged Model, Auxiliary Steamship Savannah
- Description
- The steamer Savannah holds pride of place in American history as the first steamboat to cross the Atlantic. Measuring 98’-6” and 320 tons, the little two-decker began as a sailing vessel at a New York shipyard. Local ship captain Moses Rogers and his partner William Scarbrough of Savannah, Ga. formed a Savannah-based steamship line, and Rogers had the shipyard convert the vessel to a 75-hp auxiliary steamer for a total cost of $66,000. It was luxuriously appointed, with 32 berths in 16 cabins, full-length mirrors, mahogany-lined public areas, and other amenities.
- On May 22, 1819 the Savannah cleared Savannah, Ga. under steam for Liverpool. It carried 25 cords of wood and 1,500 bushels of coal for fuel, but neither a single passenger nor any cargo. No one—not even the owners—trusted the new technology enough on the open ocean to invest their own money. On the 29-day passage to Liverpool, the Savannah operated its engines for about 100 hours, or 16% of the time. The rest was spent under sail.
- The failure to secure any paying cargo or passengers altered the company’s plans for transatlantic service. The steamer left Liverpool for Stockholm, Sweden on July 23, 1819, again unladen. Under steam 28% of the passage to Sweden, the Savannah became the first steamboat in the Baltic on August 13. Capt. Rogers declined an offer for the ship from Swedish King Charles XIV for $100,000 in hemp and iron, as well as an offer from Russian Tsar Alexander for an exclusive monopoly on steam navigation in the Black and Baltic Seas.
- The Savannah returned to Savannah in November 1819 and almost immediately sailed for Washington, DC. After two months in Washington, Rogers had failed to interest the U.S. Navy in his vessel, and it was sold to Capt. Nathan Holdridge of New York. He promptly removed the engine and began packet service between New York and Savannah. On its first voyage in October 1820, the Savannah sailed with 24 passengers and a full cargo hold. Ironically, four of its prior owners consigned cargo aboard the ill-fated vessel, now that it was an old-fashioned sailing ship. After a successful year as a packet, the Savannah wrecked at Fire Island, NY on November 5, 1821.
- In 1933, President Franklin D. Roosevelt designated May 22 as National Maritime Day, in honor of the day that the Savannah hoisted anchor on its inaugural transatlantic passage. The Smithsonian has Savannah’s original logbook detailing that pioneering voyage.
- Date made
- 1961
- cleared Savannah, Georgia
- 1819-05-22
- sailed from Liverpool to Stockholm
- 1819-07-23
- sailed in the Baltic
- 1919-08-13
- returned to Savannah
- 1819-11
- sailed from New York to Savannah
- 1820-10
- wrecked at Fire Island
- 1821-11-05
- President Franklin Delano Roosevelt named May 22 as National Maritime Day in honor of the Savannah
- 1933-05-22
- ship captain and owner
- Rogers, Moses
- owner
- Scarbrough, William
- ship captain
- Holdridge, Nathan
- designated 05-22 as National Maritime Day in honor of the Savannah
- Roosevelt, Franklin Delano
- ID Number
- TR*319026
- catalog number
- 319026
- accession number
- 236167
- Data Source
- National Museum of American History, Kenneth E. Behring Center
Rigged Model, Philadelphia Packet Ship Shenandoah
- Description
- The packet ship Shenandoah was built in 1840 by John Vaugn & Son at Philadelphia, Pa. for Thomas P. Cope & Son, better known as the Cope Line. Wealthy Philadelphia Quakers, the Copes transported about 60,000 passengers—mostly Irish immigrants—from Liverpool to Philadelphia from 1820-1870.
- Measuring 143’ long and 738 tons, the Shenandoah spent nearly its entire career on the Philadelphia–Liverpool passage. It made 14 voyages for the Cope Line from 1839-44. In 1845 it sailed for the Dunham & Dimon Liverpool Line out of NY, but the following year it returned to Philadelphia for the Black Diamond Line. By 1847 it served the New Line, clearing Philadelphia on the 1st of the month and leaving Liverpool five weeks later, on the 8th of the following month. In the late 1840s, it lost its popular captain to the new Collins ocean steamship Atlantic. Many of the old sailing packet companies lost their captains to the newer and faster transatlantic steamship lines. The Shenandoah was abandoned at sea in August 1854.
- Date made
- 1963
- original ship built
- 1840
- Cope Line operated
- 1820-1870
- sailed with the Cope Line
- 1839-1844
- sailed for the Dunham & Dimon Liverpool Line out of New York
- 1845
- sailed for the Black Diamond Line out of Philadelphia
- 1846
- sailed for the New LIne out of Philadelphia
- 1847
- abandoned at sea
- 1854-08
- shipbuilders
- John Vaugn & Son
- ship owners
- Thomas P. Cope & Son
- ID Number
- TR*322426
- catalog number
- 322426
- accession number
- 247838
- Data Source
- National Museum of American History, Kenneth E. Behring Center
Locomotive model, "Brother Jonathan"
- Description
- This is a model of a small and relatively unknown locomotive that is actually one of the most important benchmarks in American railway engineering. The "Brother Jonathan" was the first engine to have a leading truck. It was more than a short-lived prototype because it remained in regular service over twenty years.
- It was completed for the Mohawk and Hudson in mid-1832 by the West Point Foundry to a design furnished by John B. Jervis. This contract price for the engine, less tender, was $4,600. Its designer apparently based the plan on what he felt were the better designs of Robert Stephenson, a British locomotive builder. The boiler, valve gear and crank axle bear a strong resemblance to those parts of the Stephenson locomotives. However, Jervis recognized the need for a more flexible running gear and so radically changed the four square, rigid British plan by introducing a leading truck. This idea proved wonderfully effective, as already noted, but Jervis' design for a coal burning boiler proved less than successful. It would be many years before hard coal was regularly used for locomotive fuel. In the winter of 1833 a new deep and narrow wood burning firebox and a wire screened hood over the top of the smoke stack were added. The engine's name, originally the "Experiment," was probably changed at this time to "Brother Jonathan."
- Even in its original state the engine performed well. An employee of the West Point Foundry tested the engine for speed in August of 1832 with remarkable results. He said she was the "fastest and steadiest engine I have ever run...." Fourteen miles, including one stop for water, was made in thirteen minutes, and one mile was clocked in only 45 seconds. In the time when the horse was man's fastest courier, this test was miraculous. Yet surely these racing trips were rare because trains on the Mohawk and Hudson were operated at 19 mph in respect to safety and economy.
- The locomotive was rebuilt and enlarged in 1846 as an eight wheel engine and either sold or retired around 1853.
- Location
- Currently on loan
- date made
- 1967
- maker
- Severn-Lamb Ltd.
- ID Number
- TR*335608
- catalog number
- 335608
- accession number
- 1977.0358
- Data Source
- National Museum of American History, Kenneth E. Behring Center
Model of the 1837 Steam Locomotive, H. R. Dunham
- Description
- This is a 1/2 inch scale model of the engine and tender that represent the general service locomotive, Dunham built around 1837 by H. R. Dunham & Co. of New York City for the Harlem Rail Road. Contemporary drawings reveal that Dunham closely followed Baldwin’s Lancaster design. The locomotive model shows a 4-2-0 wheel arrangment. Steam locomotives are often classified by wheel arrangement, in the order of leading, driving, and trailing wheels. This engine has four leading wheels, two driving wheels, and no trailing wheels.
- The proliferation of new railroads encouraged many small machine shops to enter the locomotive business. While some of these firms, like that of M. W. Baldwin, would produce many engines and make a fortune, most, like H.R. Dunham & Co., built only a few machines and went out of business. Dunham constructed sixteen locomotives from 1836 to 1838 for the New York and Harlem, the Camden and Amboy, the Michigan Central and several other lines.
- Location
- Currently not on view
- date made
- 1961
- maker
- Severn Lamb, Ltd.
- ID Number
- TR*319306
- catalog number
- 319306
- accession number
- 234646
- Data Source
- National Museum of American History, Kenneth E. Behring Center
Model of the 1839 Steam Locomotive, Gowan & Marx
- Description
- This is a 1/2" scale model of the Gowan and Marx, a 4-4-0 freight locomotive built in 1839 for the Philadelphia and Reading Railroad. The model consists of an engine with two inclinded cylinders, horizontal boiler, a domed firebox and a four wheel tender.
- As trains grew longer and heavier, railroad companies needed more powerful locomotives. One way to increase power was to build machines with more driving wheels, or powered wheels. However, such locomotives had previously proved too rigid for the rough tracks of early American railroads, derailing often or damaging the track. On the Gowan and Marx, locomotive builders Eastwick and Harrison of Philadelphia introduced the equalizing lever, a spring suspension that distributed the engine’s weight over three points. In this arrangement, each of the four driving wheels could bounce independently as the engine negotiated rough track, greatly improving stability and traction. According to John H. White in American Locomotives: 1830-1880, the equalizing lever, which allowed the successful operation of engines with multiple pairs of driving wheels, “was possibly the most important American contribution to locomotive design.” Eastwick and Harrison’s equalizing lever proved so successful that it was used through the end of steam locomotive construction in the 1950s.
- Steam locomotives are often classified by wheel arrangement, in the order of leading, driving, and trailing wheels. The Gowan and Marx has four leading wheels, four driving wheels, and no trailing wheels. It is therefore classified as a 4-4-0 locomotive. When compared to an earlier 4-2-0 type engine, like Baldwin’s Lancaster, the 4-4-0’s additional pair of driving wheels brought a great increase in power. Intended for slow speed, heavy coal trains, the Gowan and Marx performed extremely well; on one occasion, it pulled a 101-car train of 423 tons at an average speed of 9.8 miles per hour. After 1840, the 4-4-0 or “American type” became the most popular locomotive in the country. The exceptional performance of the Gowan and Marx greatly enhanced the reputation of Eastwick and Harrison. They were subsequently invited to Russia to build locomotives for the Moscow and St. Petersburg Railway.
- Location
- Currently on loan
- date made
- 1962
- Gowan & Marx locomotive constructed
- 1839
- maker
- Shawcraft (Models) Ltd.
- ID Number
- TR*320630
- accession number
- 242186
- catalog number
- 320630
- Data Source
- National Museum of American History, Kenneth E. Behring Center
Rigged Model, Massachusetts Privateer Rhodes
- Description
- Although the Salem, Massachusetts privateer Rhodes was less than 98 feet long, it had a crew of 90. Privateers needed large crews not only to intimidate their prey and hopefully make them surrender quickly, but also to overpower their enemies if a battle occurred. After a fight, the winner also needed to put a “prize” crew aboard to sail the captured vessel into port, where the ship and contents could be inventoried and sold. The auction proceeds were then distributed among the owners, the ship officers and the crew.
- The three-masted ship Rhodes was sharply built for speed and heavily armed, with 20 cannon. Despite these features, it was captured on a cruise in the West Indies by H.M.S. ship Prothé in February 1782. It was taken back to England, where its hull shape was drawn on paper to document how it might have obtained its speed. The Royal Navy then purchased it and renamed it H.M.S. Barbadoes.
- Date made
- 1962
- privateer captured
- 1782-02
- ID Number
- TR*320667
- catalog number
- 320667
- accession number
- 245900
- Data Source
- National Museum of American History, Kenneth E. Behring Center