Transportation - Overview
Americans have always been a people on the move—on rails, roads, and waterways (for travel through the air, visit the National Air and Space Museum). In the transportation collections, railroad objects range from tools, tracks, and many train models to the massive 1401, a 280-ton locomotive built in 1926. Road vehicles include coaches, buggies, wagons, trucks, motorcycles, bicycles, and automobiles—from the days before the Model T to modern race cars. The accessories of travel are part of the collections, too, from streetlights, gas pumps, and traffic signals to goggles and overcoats.
In the maritime collections, more than 7,000 design plans and scores of ship models show the evolution of sailing ships and other vessels. Other items range from scrimshaw, photographs, and marine paintings to life jackets from the Titanic.
"Transportation - Overview" showing 24 items.
Page 1 of 3
Foghorn
- Description
- This galvanized metal foghorn was a standard piece of equipment on 19th-century fishing dories. It was used to convey the dory’s location during winter snowstorms and heavy fog. In such conditions, a member of the crew aboard the schooner would pump a larger foghorn continuously to make sure the dorymen were aware of the schooner’s location.
- Dories were small, open boats equipped with a sail and oars. Stacks of them were carried aboard large fishing schooners. Once a schooner reached the offshore fishing grounds, the dories were set in the water and manned by pairs of crewmen. These fishermen set their trawls—long lines with baited hooks—and then hauled them in, removing the fish into the dory. Once their dory was filled, the fishermen rowed or sailed back to the schooner to offload the catch and rebait the hooks, if needed.
- The prospect of getting separated from the schooner in bad weather and thick fog was a constant worry among fishermen on Georges and the Grand Banks. In addition to a dory compass, a water bottle, and hardtack, the foghorn was an essential part of a doryman’s survival kit.
- Date made
- 1880s
- maker
- Wilcox, Crittenden & Co.
- ID Number
- AG*029382
- catalog number
- 029382
- accession number
- 12705
- Data Source
- National Museum of American History, Kenneth E. Behring Center
New England Whale Ship
- Description
- This model represents a typical Massachusetts whaleship of the mid-19th century, fully rigged and ready for a long cruise that might last for as much as four years. The name “U.S. Grant, Edgartown” on the ship’s stern is fictional—no ship by that name ever sailed for the whaling fleet. The ship’s bottom is lined with copper sheathing, to keep out the teredo navalis, a tropical worm that bored into the wood of ship’s hulls and weakened the structure, as the termite does to wooden structures on land.
- The whaleboats are the most prominent features. After whales were sighted by lookouts perched at the mast tops, the boats were dropped over the sides of the mother ship to chase them. Also over the side are the cutting stages, where the whale’s fat, or blubber, was sliced off the body in long strips.
- The main feature on the ship’s deck is the try-works, or giant pots set into a brick framework, where the whale’s blubber, was boiled down into oil. After the blubber became liquid, it was drawn off to cool and then poured into heavy barrels and stored below in the ship’s cargo hold.
- This model was purchased in 1875 at Edgartown, on the island of Martha’s Vineyard, Mass.; it was one of the first objects in the Smithsonian’s National Watercraft Collection.
- Date made
- 1875
- model was purchased
- 1875
- ID Number
- TR*025726
- catalog number
- 025726
- accession number
- 4353
- Data Source
- National Museum of American History, Kenneth E. Behring Center
Pacific Steam Whaleship Orca
- Description
- The steam whaler Orca was built at San Francisco in 1882 specifically for the Pacific and Arctic whale fisheries. By the late 19th century, the Atlantic whale was too scarce due to overhunting, and whaling had moved almost completely to distant western waters to exploit the remaining whales.
- Measuring 177 feet in length and 628 tons, Orca had a 280-HP steam engine for propulsion. It also had a full suit of auxiliary sails for backup and fuel conservation. When built, Orca was the largest auxiliary steam whaler in the United States.
- The bark-rigged vessel was heavily built and braced, with a strongly raked bow to work in the Arctic ice pack. The heavy timbers and bow shape allowed it to be driven up onto the ice, where its weight helped to break through. Orca’s propeller had two blades so it could be aligned vertically with the stern timbers when not in use in order to protect it from the ice.
- Information collected by Mystic Seaport Museum in Mystic, Conn. indicates that Orca, along with many other Pacific whalers, resorted to shanghaiing, or acquiring crewmen from agents ashore who forced potential crewmen onto their ships in various ways. With around two dozen whaleships clearing San Francisco each year for the Pacific whaling grounds, the need for crewmen was great.
- Date made
- 1894
- reference material
- Mystic Seaport Museum
- ID Number
- TR*076237
- catalog number
- 076237
- accession number
- 028022
- Data Source
- National Museum of American History, Kenneth E. Behring Center
Whaler's Head Spade
- Description
- Once a whale was caught, killed, and brought alongside the mother ship, the outer flesh and fat layer, or blubber, was peeled off the carcass. Then the remains were drawn onto the vessel’s deck for further processing.
- The heavy head spade was used for decapitating the whale, by chopping through the vertebrae at the base of the animal’s skull. Then the head and bone could be further processed.
- ID Number
- 1990.0018.102
- catalog number
- 1990.0018.102
- accession number
- 1990.0018
- Data Source
- National Museum of American History, Kenneth E. Behring Center
Whaler's Mincing Knife
- Description
- Whaling crews used mincing knives to cut the blubber strips into thin slices down to, but not through, the thick whale skin. This process increased the surface area of the blubber and helped it melt faster in the try-pots. Cut in this fashion, the sections of whale blubber and skin were known as “bible leaves” because they resembled the pages of a book.
- date made
- 1876
- collected
- 1876
- ID Number
- AG*025912
- accession number
- 005019
- catalog number
- 025912
- Data Source
- National Museum of American History, Kenneth E. Behring Center
Whaler's Boarding Knife
- Description
- The work of carving blubber from a whale carcass and hauling the long, narrow strips of flesh, called “blanket pieces,” aboard the ship onto the deck was called “boarding.” The boarding knife was an extremely sharp, double-edged sword blade at the end of a short wooden pole. It served a variety of purposes, from cutting a hole in the whale’s flesh for the blubber hook, to cutting the long strips of flesh into shorter sections for further processing.
- These tools were kept extremely sharp to cut the whale’s flesh easily. With the decks and tools so slippery from the whale processing, using them was reserved for the ship’s officers.
- date made
- 1876
- collected
- 1876
- ID Number
- AG*026608
- catalog number
- 026608
- accession number
- 4927
- Data Source
- National Museum of American History, Kenneth E. Behring Center
Whaler's Carved Bailer Handle
- Description
- Whalemen used long-handled bailers to remove hot whale oil from large try-pots into cooling tanks, and from those tanks into storage barrels. They had long handles to prevent the handler from being splashed or burned with molten oil.
- This example’s wooden handle has figures of whales whittled into its surface to indicate the number and species of mammals that crossed its greasy path. The “B.H.” refers to bowhead, “S” for sperm, “H.B.” for humpback, and “W” for right whale.
- date made
- 1828
- ID Number
- AG*055809
- catalog number
- 55809
- accession number
- 12284
- Data Source
- National Museum of American History, Kenneth E. Behring Center
Whaler's Blubber Fork
- Description
- Once a whale was killed and its blubber was cut up and hauled aboard the ship for processing, the chunks of flesh were moved around the slippery vessel with long-handled, two-tined blubber forks. These forks were used to pitch the pieces of minced blubber into the hot try-pots to boil it down into oil. The long handles prevented sore backs from too much bending over and protected the men from getting too close to the boiling oil.
- date made
- mid-1800s
- ID Number
- AG*055818
- catalog number
- 055818
- accession number
- 012285
- Data Source
- National Museum of American History, Kenneth E. Behring Center
Whaler's Allen's Gun Harpoon
- Description
- In the later 19th century, guns with explosive charges shooting the harpoons took the place of hand tools for catching and killing whales. They were much safer, for they could be shot at a whale from greater distances than a hand lance could be applied. They also penetrated the whale’s skin deeper and were harder for the animal to dislodge.
- Gun harpoons were also far more efficient, for the steam whalers could approach the prey directly and did not need labor-intensive whaleboats and their highly trained crews any longer.
- Designed to be fired from a shoulder gun, this nonexplosive style of harpoon was invented by Oliver Allen of Norwich, Conn. to fasten to whales prior to killing.
- date made
- mid-1800s
- harpoons replaced hand tools
- late 19th century
- patentee
- Allen, Oliver
- inventor
- Allen, Oliver
- ID Number
- AG*056230
- catalog number
- 056230
- accession number
- 012333
- patent number
- 5949
- Data Source
- National Museum of American History, Kenneth E. Behring Center
Whaler's Harpoon with Toggle Head
- Description
- The first step in catching a whale was throwing at least two sharp harpoons into its back, to ensure that the whaleboat was securely fastened to its prey. Harpoon shafts were made of soft wrought iron, so that they would bend and not break off when twisted, which risked losing the wounded whale.
- A line at the bottom of the harpoon’s wooden handle attached it to the whaleboat. Once in the whale’s flesh, the sharp toggle tip swiveled sideways, making it harder for the tip of the weapon to pull out. Whales normally dove deep after the first prick, to try and escape the sharp jab from the surface of the ocean. This harpoon shaft was twisted by a descending whale.
- date made
- 1882
- maker
- D. & D.
- ID Number
- AG*056237
- catalog number
- 056237
- accession number
- 012284
- Data Source
- National Museum of American History, Kenneth E. Behring Center