Transportation - Overview
Americans have always been a people on the move—on rails, roads, and waterways (for travel through the air, visit the National Air and Space Museum). In the transportation collections, railroad objects range from tools, tracks, and many train models to the massive 1401, a 280-ton locomotive built in 1926. Road vehicles include coaches, buggies, wagons, trucks, motorcycles, bicycles, and automobiles—from the days before the Model T to modern race cars. The accessories of travel are part of the collections, too, from streetlights, gas pumps, and traffic signals to goggles and overcoats.
In the maritime collections, more than 7,000 design plans and scores of ship models show the evolution of sailing ships and other vessels. Other items range from scrimshaw, photographs, and marine paintings to life jackets from the Titanic.
"Transportation - Overview" showing 8 items.
Half Hull Model of Clipper Ship Young America
- Description
- This is the original builder’s half hull model of the famous ship Young America, constructed by the renowned shipbuilder William Webb in 1852/53 at his New York shipyard. Measuring 243 feet long on deck and 1,961 tons, the Young America was an extreme clipper, characterized by a sharp bow and long, narrow hull. Constructed lightly for speed and commonly sailing the harsh waters of Cape Horn off the southern tip of South America with crews of up to 100 men, clippers often lasted only about ten years before being sold to foreign owners.
- Costing $140,000 to build, the Young America set a number of speed records. It sailed from New York to San Francisco 20 times, averaging 118 days per trip. Its reputation for strength and speed earned high freight rates—its maiden voyage from New York to San Francisco earned $86,400. The clipper traded mainly between Liverpool, New York and San Francisco, but also sailed to China, Hawaii, Australia, New Zealand, Belgium, the Philippines, Mauritius and other countries. After a very long and profitable 30-year career, the Young America was sold to Austrian owners in 1883 and renamed the Miroslav. In February 1886, the ship cleared Delaware for a trading voyage and was never seen again.
- Half hull models were the first step in the construction of a ship. They were carved out of horizontal strips of wood known as lifts, and only one side was needed since ships are symmetrical. After a model was approved, its lines were taken (measured) and it was disassembled. Then the lines were lofted, or drawn at full scale on the floor. The actual ship’s frames were cut to fit the lines on the floor and then set in place along the keel during the construction process. Sometimes the models were discarded or even burned as firewood after use, but many original examples are preserved today.
- Date made
- 1853
- sold and renamed
- 1883
- ship disappeared after setting sail from Delaware
- 1886
- maker
- Webb, William H.
- ID Number
- TR*160135
- catalog number
- 160135
- accession number
- 15059
- Data Source
- National Museum of American History, Kenneth E. Behring Center
Joseph Francis Life-Car
- Description
- As maritime traffic expanded in the early 19th century, especially with the rise in passenger travel, water safety became a top priority for American shipping inventors. This life-car, patented by Joseph Francis in 1845, was one of the most successful life-preserving devices developed at the time. Buoyant and pod-shaped, the metal life-car was used to rescue shipwreck victims when the vessel was foundering near land. While standing on the beach, a person from a lifesaving station used a cannon-like gun to shoot sturdy lines out to the ship, which would then be tied to the ship’s mast. The life-car was attached to, and pulled, along these lines. Up to four people were bolted into the airtight compartment. They laid flat as they were hauled through the rough waters to the safety of the shore.
- This life-car was first used on January 12, 1850, to rescue the stranded British bark Ayrshire. The ship, most likely filled with Irish immigrants fleeing the potato famine, ran aground on a sand bar off the New Jersey shore at Squan Beach, now known as Manasquan. A blinding snow storm made the ocean too dangerous to launch a surfboat, the usual method of rescue, so local lifesavers decided to launch the newly installed, experimental life-car. Although never tested in an actual emergency, the Francis life-car performed as envisioned.
- Out of 166 passengers and 36 crew members on the Ayrshire, only one was lost, perhaps needlessly, in the short journey from ship to shore. A male passenger insisted on riding on top of the life-car while his family inside was hauled to safety. He could not hold on and was washed away by the surf. Over the next three years, this device rescued at least 1,400 people on the New Jersey shore alone, as well as countless amounts of valuable cargo. The original, groundbreaking life-car used in the Ayrshire wreck was donated to the Smithsonian Institution by Joseph Francis in 1885.
- date made
- late 1840s
- patented
- 1845
- Life-Car first used to rescue Ayrshire
- 1850-01-12
- Life-Car donated to the Smithsonian Institution
- 1885
- patentee
- Francis, Joseph
- ID Number
- TR*160322
- catalog number
- 160322
- accession number
- 16136
- Data Source
- National Museum of American History, Kenneth E. Behring Center
Whaler's Harpoon with Toggle Head
- Description
- The first step in catching a whale was throwing at least two sharp harpoons into its back, to ensure that the whaleboat was securely fastened to its prey. Harpoon shafts were made of soft wrought iron, so that they would bend and not break off when twisted, which risked losing the wounded whale.
- A line at the bottom of the harpoon’s wooden handle attached it to the whaleboat. Once in the whale’s flesh, the sharp toggle tip swiveled sideways, making it harder for the tip of the weapon to pull out. Whales normally dove deep after the first prick, to try and escape the sharp jab from the surface of the ocean. This harpoon shaft was twisted by a descending whale.
- date made
- 1882
- maker
- D. & D.
- ID Number
- AG*056237
- catalog number
- 056237
- accession number
- 012284
- Data Source
- National Museum of American History, Kenneth E. Behring Center
Whale Harpoons, or Temple Toggle Irons
- Description
- While the African American blacksmith and former slave Lewis Temple did not invent the harpoon toggle, his invention made it better. The first barb at the tip of the toggle iron was designed to penetrate the whale’s flesh. The second barb also went straight in. A small wooden peg holding the lower barb in place would then break when the whale pulled away, allowing the barbed head to swivel away from the shaft. The new T-shape of the barb prevented the dart from pulling out of its wound.
- It was a harpooner’s responsibility to keep his tools sharp and well lubricated, to ensure that the toggle swiveled freely. Sometimes the men fashioned covers for the heads of their harpoons to keep them clean and dry until needed for use.
- One of these irons, or gigs, is shown in the closed position for entering the whale’s flesh; the other is toggled open to show how much harder it was to pull out.
- Date made
- 1882
- inventor
- Temple, Lewis
- ID Number
- AG*056244
- catalog number
- 056244
- accession number
- 012284
- Data Source
- National Museum of American History, Kenneth E. Behring Center
Ship Model, Chesapeake Bay Log Canoe
- Description
- This model of a Chesapeake Bay log canoe was built in 1880 and displayed at the Great International Fisheries Exhibition in London in 1883. It shows a two-masted log canoe with a mustard-colored hull. Although this model may look more like a recreational sailboat than a traditional paddling canoe, its roots can be traced back to the dugouts built and used by American Indians. Native Americans along the bay used dugouts, made by hollowing out a single tree trunk, to spear fish, gather oysters, and travel from one village to another. Europeans adopted the log-canoe technology shortly after arriving in the region in the early 1600s. By the start of the 18th century, colonists had modified the standard, single-log dugout, by hewing and shaping several logs and fitting them together to enlarge the craft. They added masts and sails, providing the means to travel farther and giving the vessels their distinctive appearance.
- Despite the widespread use of frame-and-plank shipbuilding techniques around the Chesapeake, watermen continued building and using log canoes well into the 20th century. The canoes were ideal for oyster tonging in the many protected creeks and rivers that flow into the bay. This model includes a pair of hand tongs of the sort made by local blacksmiths for oystermen. A waterman would anchor his canoe over an oyster bed and lower the tongs into the water. With a scissoring motion, he would rake the tongs together until the iron basket was full and ready to be lifted onboard.
- In terms of construction, the log canoe is the forerunner to the bugeye, which is essentially an enlarged canoe built of seven or nine logs with a full deck added over the hold. While log canoes are no longer used in commercial fishing, they can still be seen in special sailboat races on the Eastern Shore of the Chesapeake.
- date made
- 1880
- ID Number
- TR*025003
- catalog number
- 025003
- accession number
- 4586
- Data Source
- National Museum of American History, Kenneth E. Behring Center
Whaler's Shoulder or Darting Gun
- Description
- By the later 19th century, guns had replaced most hand harpoons and lances, since they were far more efficient and deadly to the prey. They also could be shot from a safer distance from the prey than the hand tools could be wielded. The darting gun was one of the more popular types. Loaded with different darts, this versatile weapon could be used both for harpooning and killing whales.
- This particular gun was displayed at the 1883 International Fisheries Exhibition in London, England. After the display ended, it was donated to the Smithsonian by its inventor, Capt. Eben Pierce of New Bedford, Mass.
- date made
- 1880s
- guns replaced hand tools
- late 19th century
- displayed at the International Fisheries Exhibition
- 1883
- maker
- Pierce, Eben
- ID Number
- TR*316550
- catalog number
- 316550
- accession number
- 66767
- Data Source
- National Museum of American History, Kenneth E. Behring Center
Ship Model, Lighthouse Tender Joseph Henry
- Description
- This model represents the U.S. Lighthouse Tender Joseph Henry, a side-wheeled steamer built by Howard & Company in Jeffersonville, Indiana, in 1880. This 180-foot-long vessel was built for service along the nation’s inland waterways. Lighthouse tenders served both coastal and inland areas by delivering supplies, fuel, news, and relief and maintenance crew to lighthouses and lightships. They also maintained aids to navigation, including markers identifying channels, shoals, and obstructions. Based out of Memphis, the Joseph Henry worked along the Mississippi and Missouri Rivers until 1904.
- The vessel’s namesake, Joseph Henry, was America’s foremost scientist in the 19th century. His expertise was in the field of electromagnetism. Henry was a professor at the College of New Jersey (Princeton) when he was named the first Secretary of the Smithsonian Institution, a position he held from 1846 until his death in 1878. He also served on the U.S. Lighthouse Board (1852-78), and implemented various improvements in lighting and signaling during his tenure. This lighthouse tender was named in his honor at its launching two years after his death.
- Date made
- 1880
- 1962
- used
- late 19th century
- ID Number
- TR*321486
- catalog number
- 321486
- accession number
- 245714
- Data Source
- National Museum of American History, Kenneth E. Behring Center
Ship Model, Bugeye Lillie Sterling
- Description
- The bugeye was a type of sailing work boat unique to the Chesapeake Bay. Designed for oyster dredging, it was also used for hauling freight in the Bay’s shallow waters. This model, like the bugeye it represents, was built in 1885 by E. James Tull, a boatbuilder in Pocomoke City, Maryland. Tull displayed this model of the Lillie Sterling at the 1893 Chicago World’s Fair as part of an exhibit organized by the U.S. Bureau of Fisheries. He won a medal for the vessel’s practical design.
- Bugeyes were first built after the Civil War, when the Maryland state legislature repealed an 1820 ban on oyster dredging. Dredges--heavy iron frames holding long mesh bags--were introduced in the bay by New Englanders seeking to replenish northern oyster beds with Chesapeake oysters. Maryland lawmakers banned dredging and restricted oyster harvesting to residents of the state. But as markets expanded in the 1860s, the ban was lifted to allow dredging in certain areas of the bay. Fearful that dredging would deplete the bay’s oysters, lawmakers sought to limit the dredge’s efficiency by restricting its use to sailing vessels. This law ensured that sailing craft, not steamers, would dominate the Chesapeake’s oyster industry. To this day, oyster dredging is still carried out by sail-powered boats in Maryland.
- The first bugeyes were large log canoes, built of seven or nine logs that were hollowed out, shaped, and pinned together lengthwise. They were built with full decks, which provided a working platform for the crew to empty the dredges and sort through the catch. By the 1880s, bugeyes like the Lillie Sterling were constructed with full framing and planking instead of logs. Although bugeyes were widely used in the oyster trade for several decades, they were gradually replaced by skipjacks, an easier and cheaper vessel to build. The origin of the name "bugeye" remains unknown.
- date made
- 1885
- maker
- Tull, E. James
- ID Number
- TR*76256
- accession number
- 28022
- catalog number
- 76256
- Data Source
- National Museum of American History, Kenneth E. Behring Center