Work - Overview
The tools, rules, and relationships of the workplace illustrate some of the enduring collaborations and conflicts in the everyday life of the nation. The Museum has more than 5,000 traditional American tools, chests, and simple machines for working wood, stone, metal, and leather. Materials on welding, riveting, and iron and steel construction tell a more industrial version of the story. Computers, industrial robots, and other artifacts represent work in the Information Age.
But work is more than just tools. The collections include a factory gate, the motion-study photographs of Frank and Lillian Gilbreth, and more than 3,000 work incentive posters. The rise of the factory system is measured, in part, by time clocks in the collections. More than 9,000 items bring in the story of labor unions, strikes, and demonstrations over trade and economic issues.
"Work - Overview" showing 3404 items.
Page 332 of 341
Whaler's Blubber Fork
- Description
- Once a whale was killed and its blubber was cut up and hauled aboard the ship for processing, the chunks of flesh were moved around the slippery vessel with long-handled, two-tined blubber forks. These forks were used to pitch the pieces of minced blubber into the hot try-pots to boil it down into oil. The long handles prevented sore backs from too much bending over and protected the men from getting too close to the boiling oil.
- date made
- mid-1800s
- ID Number
- AG*055818
- catalog number
- 055818
- accession number
- 012285
- Data Source
- National Museum of American History, Kenneth E. Behring Center
Whaler's Allen's Gun Harpoon
- Description
- In the later 19th century, guns with explosive charges shooting the harpoons took the place of hand tools for catching and killing whales. They were much safer, for they could be shot at a whale from greater distances than a hand lance could be applied. They also penetrated the whale’s skin deeper and were harder for the animal to dislodge.
- Gun harpoons were also far more efficient, for the steam whalers could approach the prey directly and did not need labor-intensive whaleboats and their highly trained crews any longer.
- Designed to be fired from a shoulder gun, this nonexplosive style of harpoon was invented by Oliver Allen of Norwich, Conn. to fasten to whales prior to killing.
- date made
- mid-1800s
- harpoons replaced hand tools
- late 19th century
- patentee
- Allen, Oliver
- inventor
- Allen, Oliver
- ID Number
- AG*056230
- catalog number
- 056230
- accession number
- 012333
- patent number
- 5949
- Data Source
- National Museum of American History, Kenneth E. Behring Center
Whaler's Harpoon with Toggle Head
- Description
- The first step in catching a whale was throwing at least two sharp harpoons into its back, to ensure that the whaleboat was securely fastened to its prey. Harpoon shafts were made of soft wrought iron, so that they would bend and not break off when twisted, which risked losing the wounded whale.
- A line at the bottom of the harpoon’s wooden handle attached it to the whaleboat. Once in the whale’s flesh, the sharp toggle tip swiveled sideways, making it harder for the tip of the weapon to pull out. Whales normally dove deep after the first prick, to try and escape the sharp jab from the surface of the ocean. This harpoon shaft was twisted by a descending whale.
- date made
- 1882
- maker
- D. & D.
- ID Number
- AG*056237
- catalog number
- 056237
- accession number
- 012284
- Data Source
- National Museum of American History, Kenneth E. Behring Center
Whale Harpoons, or Temple Toggle Irons
- Description
- While the African American blacksmith and former slave Lewis Temple did not invent the harpoon toggle, his invention made it better. The first barb at the tip of the toggle iron was designed to penetrate the whale’s flesh. The second barb also went straight in. A small wooden peg holding the lower barb in place would then break when the whale pulled away, allowing the barbed head to swivel away from the shaft. The new T-shape of the barb prevented the dart from pulling out of its wound.
- It was a harpooner’s responsibility to keep his tools sharp and well lubricated, to ensure that the toggle swiveled freely. Sometimes the men fashioned covers for the heads of their harpoons to keep them clean and dry until needed for use.
- One of these irons, or gigs, is shown in the closed position for entering the whale’s flesh; the other is toggled open to show how much harder it was to pull out.
- Date made
- 1882
- inventor
- Temple, Lewis
- ID Number
- AG*056244
- catalog number
- 056244
- accession number
- 012284
- Data Source
- National Museum of American History, Kenneth E. Behring Center
Whaler's Hand Lance
- Description
- After harpoons fastened the whale and whaleboat together, a whale was given plenty of time and rope to dive, try to swim away, and otherwise wear itself out. Once the exhausted animal returned to the surface to breathe, the whaleboat approached it, and a hand lance, also known as a killing iron, was used to actually dispatch the animal.
- Hand lances had long shafts, to allow the point to penetrate deep into the whale’s body in search of the thick neck arteries. The tips of the killing irons were leaf or oval shaped and extremely sharp, so that they cut on the way in and on the way out, and were easier to remove and stab repeatedly. Cutting the neck arteries prevented the animal from deep diving and hastened its bleeding to death.
- This nickel-plated example was manufactured and donated by Luther Cole of Fairhaven, Mass.
- Date made
- 1880s
- maker
- Cole, Luther
- ID Number
- AG*056357
- accession number
- 012326
- catalog number
- 056357
- Data Source
- National Museum of American History, Kenneth E. Behring Center
Logbook, Whaling Bark Virginia of New Bedford
- Description
- This logbook chronicles six months of a whaling voyage to the Pacific whaling grounds by the bark Virginia of New Bedford, Mass. The voyage began in late August 1840.
- Most official ship logbooks record wind, weather, and sail changes, directions and ports reached and cleared. This one was filled with extra details and a few drawings by its keeper, Thomas M. Peakes. On 16 December 1840, two whales were caught and processed. The figures inside the whale stamps for those events show the number of barrels of oil taken from each whale. The last word, “Amanda,” reveals the writer’s homesickness. Her name appears often, as do the words “home sweet home.”
- On 31 January 1841, crewman Henry N. North fell overboard and almost perished before being rescued. Towards the end of March 1841, log keeper Peakes was injured himself and had to go ashore at Talcahuano, Chile. Virginia’s ship’s log ended here, after noting that a kindly local widow took Peakes into her home to help him regain his health. After a three-week recovery, Peakes shipped out for home on the whaler Montano.
- date made
- 1840
- ID Number
- AG*056866
- catalog number
- 56866
- accession number
- 2009.0183
- Data Source
- National Museum of American History, Kenneth E. Behring Center
Whaler's Monkey Belt
- Description
- After a whale was captured and killed, its carcass was towed by the whaleboat to the side of the mother ship for processing. Cutting up the whale was done by crewmen standing on a wooden plank, or cutting stage, rigged out over the side of the ship so that they could stand directly over the body. Crewmen used this canvas “monkey belt” to secure themselves while they stripped the whale of its blubber. It was dangerous and slippery work. If a sailor slid into the water he risked drowning or being attacked by sharks looking for an easy meal.
- date made
- 1883
- ID Number
- AG*057716
- catalog number
- 057716
- accession number
- 2009.0184
- Data Source
- National Museum of American History, Kenneth E. Behring Center
Whaler's Whalebone Scraper
- Description
- This odd tool was used to scrape the flesh off the bones from a freshly caught whale. It was the last step in processing the whale’s body before the bone was partially dried on deck and then stowed below in the cargo hold. Once the ship was back in port, the bone was placed on end in large yards to dry further.
- The bone and baleen—rows of bony strips in a whale’s upper jaw that filter food from seawater—from a whaling voyage could yield as much as $50,000, or even greater profits than the oil itself. Baleen served a wide variety of purposes from buggy whips to umbrella ribs to women’s corset stays.
- date made
- 1880s
- ID Number
- AG*057778
- catalog number
- 057778
- accession number
- 012278
- Data Source
- National Museum of American History, Kenneth E. Behring Center
Fox and Geese Game Board
- Description
- This 9-inch square board with 32 holes was made for playing Fox and Geese, a game of strategy between two players. The 19 pegs representing geese and a single longer peg for the fox are long gone from this particular board made in Gloucester, Massachusetts. Fox and Geese was among the games played by fishermen during idle times on sailing schooners working in the North Atlantic fisheries. This board was part of a display on “Habits of Fishermen,” at the International Fisheries Exhibition in London in 1883. Other games in the display, all from Gloucester, included cards, a checkerboard, backgammon, and a diamond puzzle.
- The rules of play for Fox and Geese are simple: one player controls the fox, while the other controls the geese. The fox can move in a straight line in any direction and, as it jumps over geese, the geese are removed from the board. To win, the fox must break through the entire line of geese. The geese are only allowed to move forward or sideways. To win, they must corner the fox so it cannot move.
- The Oxford English Dictionary cites a 1633 reference to the game from a play called Fine Companion by Shackerley Marmion: “Let him sit in the shop . . . and let him play at fox and geese with the foreman.” The game was played in colonial America and, with minor variations, well into the 19th and 20th centuries.
- This game board was one of several items donated to the Smithsonian by Capt. George Merchant Jr., of Gloucester.
- Date made
- 1883
- ID Number
- AG*057950
- catalog number
- 057950
- accession number
- 12158
- Data Source
- National Museum of American History, Kenneth E. Behring Center
Hand Lance or Killing Iron
- Description
- A hand lance with a long iron shaft and a small oval or leaf-shaped tip was also known as a killing iron. It was designed to dispatch a whale quickly and efficiently, once the mammal came to the water surface for the last time.
- The hand lance was stabbed repeatedly into a whale’s thick neck arteries. The sharp leaf-shaped tip allowed easy removal for another thrust. Cutting these arteries prevented the whale from deep dives and hastened its bleeding to death.
- Normally, multiple hand lances were carried aboard a whaleboat, so that if one was lost it could be easily replaced without returning to the mother ship for a spare one. By the late 19th century, guns had replaced most hand-thrown harpoons and lances. They were more efficient, more accurate, and safer, for a whaler could shoot a dart at a greater distance from the dangerous whale than a harpoon could be thrown.
- ID Number
- AG*072825B
- catalog number
- 072825B
- accession number
- 10616
- Data Source
- National Museum of American History, Kenneth E. Behring Center