Carpenter's Slide Rule by S. A. Jones

Description
One of the first types of slide rules sold and made in the United States was the carpenter's rule, used for calculations relating to timber, which was one of the country's major early exports. This rule is marked on the lower arm: S. A. JONES & CO. (/) HARTFORD–CON. (/) WARRANTED BOX WOOD. Solomon A. Jones made carpentry tools in Hartford, Conn., from 1838 to 1841. Compare to 1987.0771.01, a British carpenter's rule of the same period. The collections include an image of someone holding the rule (see 2003.0215.02).
This boxwood carpenter’s rule has a brass joint, metal caps at the ends of the arms, and a brass slide. The front of the slide has two identical logarithmic scales labeled B and C. Above is an identical logarithmic scale on the arm; this scale is labeled A. All three of these scales have a double cycle of logarithms, like the A and B scales on a Mannheim rule. Below the C scale on the arm is a scale labeled D and also GIRT LINE, which is divided logarithmically and runs from 4 to 40 (in other words, this is not the D or principal scale of Mannheim slide rules). The girt line can be used with other scales to estimate the volume of timber available from a log.
Underneath the slide is imprinted the number 33. The back of the slide is also stamped with the number 33 and is somewhat crudely marked with a twelve-inch ruler, divided to eighths of an inch. The lower arm contains scales for making scale drawings that are 1/4, 1/2, 3/4, and 1 inch to the foot. The units on the 1/4-inch chain scale appear to be numbered erroneously after 18 (e.g., the next numbered division after 18 is 10 rather than 20). Along the edge is another twelve-inch scale, divided to eighths of an inch.
The other side of the rule has a scale of 24 inches along one edge, divided to sixteenths of an inch. One arm has a scale labeled by twos from 34 to zero and is marked M. A number for 31 is between 32 and 30, and the number for 6 is omitted.
The other arm has a scale marked E and labeled by twos from 24 to zero. The number 24 appears twice, and 6 is omitted. The M and E scales were used in cutting polygonal sections of wood. The outside edge has two scales, each dividing one foot into 100 parts.
References: Kenneth D. Roberts, Introduction to Rule Collecting (Hartford, Conn.: The Bond Press, Inc., 1982); "Solomon A. Jones & Co.," The Davistown Museum, http://www.davistownmuseum.org/bioSAJones.html.
Location
Currently not on view
Object Name
calculating rule
rule
slide rule
date made
1838-1841
maker
S. A. Jones & Co.
Physical Description
boxwood (overall material)
brass (part material)
Measurements
overall: .5 cm x 31.2 cm x 3.9 cm; 3/16 in x 12 9/32 in x 1 17/32 in
place made
United States: Connecticut, Hartford
ID Number
2003.0216.01
accession number
2003.0216
catalog number
2003.0216.01
subject
Science & Mathematics
Mathematics
Slide Rules
Rule, Calculating
Carpentry
See more items in
Medicine and Science: Mathematics
Slide Rules
Data Source
National Museum of American History, Kenneth E. Behring Center
Additional Media

Visitor Comments

Add a comment about this object

Submit a comment or ask a question about this object using the form below. Submissions are moderated and may receive a curator response. Please note that we cannot evaluate or appraise your personal artifacts. For other questions or general inquiries please visit our FAQ or contact page.

Personal information will not be shared or result in unsolicited e-mail. See our privacy policy.

Image CAPTCHA
Enter the characters shown in the image.