Cultures & Communities - Overview
Furniture, cooking wares, clothing, works of art, and many other kinds of artifacts are part of what knit people into communities and cultures. The Museum’s collections feature artifacts from European Americans, Latinos, Arab Americans, Asian Pacific Americans, African Americans, Gypsies, Jews, and Christians, both Catholics and Protestants. The objects range from ceramic face jugs made by enslaved African Americans in South Carolina to graduation robes and wedding gowns. The holdings also include artifacts associated with education, such as teaching equipment, textbooks, and two complete schoolrooms. Uniforms, insignia, and other objects represent a wide variety of civic and voluntary organizations, including youth and fraternal groups, scouting, police forces, and firefighters.
"Cultures & Communities - Overview" showing 888 items.
Page 85 of 89
Bone Fid
- Description
- Made of hard wood, bone, or ivory and tapering to a point, fids were used mostly for ropework, such as splicing. On deck, they were also used for breaking knots that might be frozen from overtightening, wet weather, or other conditions. In a pinch, one could also serve as a temporary belaying pin to tie off a line, or even as a weapon.
- date made
- 1800s
- ID Number
- AG*025650
- catalog number
- 025650
- accession number
- 4798
- Data Source
- National Museum of American History, Kenneth E. Behring Center
Whale Bone Seam Rubber
- Description
- Seam rubbers were part of a sail maker’s tool kit. They were used to smooth and flatten the seams of heavy canvas sailcloth, where two pieces were joined or the edges were hemmed before they were sewn. This unusually large example was probably carved from the panbone, part of a whale’s jaw.
- date made
- 1800s
- ID Number
- AG*025793
- accession number
- 4957
- catalog number
- 025793
- Data Source
- National Museum of American History, Kenneth E. Behring Center
Whalebone Thimble Eye
- Description
- This rope-strapped thimble carved from whalebone would have had a light rope through the eye for rigging, perhaps on a whaleboat.
- These miniature items also served as children’s toys or curiosities back home. Toys in the form of miniature working ship parts were easy and quick for sailors to carve, and they did not require much skill to make. They also served as potent reminders of where and what the men were doing during their long absences from their friends and families.
- date made
- 1800s
- ID Number
- AG*025801
- catalog number
- 025801
- accession number
- 2009.0182
- Data Source
- National Museum of American History, Kenneth E. Behring Center
Whaler's Mincing Knife
- Description
- Whaling crews used mincing knives to cut the blubber strips into thin slices down to, but not through, the thick whale skin. This process increased the surface area of the blubber and helped it melt faster in the try-pots. Cut in this fashion, the sections of whale blubber and skin were known as “bible leaves” because they resembled the pages of a book.
- date made
- 1876
- collected
- 1876
- ID Number
- AG*025912
- accession number
- 005019
- catalog number
- 025912
- Data Source
- National Museum of American History, Kenneth E. Behring Center
Whaler's Boarding Knife
- Description
- The work of carving blubber from a whale carcass and hauling the long, narrow strips of flesh, called “blanket pieces,” aboard the ship onto the deck was called “boarding.” The boarding knife was an extremely sharp, double-edged sword blade at the end of a short wooden pole. It served a variety of purposes, from cutting a hole in the whale’s flesh for the blubber hook, to cutting the long strips of flesh into shorter sections for further processing.
- These tools were kept extremely sharp to cut the whale’s flesh easily. With the decks and tools so slippery from the whale processing, using them was reserved for the ship’s officers.
- date made
- 1876
- collected
- 1876
- ID Number
- AG*026608
- catalog number
- 026608
- accession number
- 4927
- Data Source
- National Museum of American History, Kenneth E. Behring Center
Whaler's Carved Bailer Handle
- Description
- Whalemen used long-handled bailers to remove hot whale oil from large try-pots into cooling tanks, and from those tanks into storage barrels. They had long handles to prevent the handler from being splashed or burned with molten oil.
- This example’s wooden handle has figures of whales whittled into its surface to indicate the number and species of mammals that crossed its greasy path. The “B.H.” refers to bowhead, “S” for sperm, “H.B.” for humpback, and “W” for right whale.
- date made
- 1828
- ID Number
- AG*055809
- catalog number
- 55809
- accession number
- 12284
- Data Source
- National Museum of American History, Kenneth E. Behring Center
Whaler's Blubber Fork
- Description
- Once a whale was killed and its blubber was cut up and hauled aboard the ship for processing, the chunks of flesh were moved around the slippery vessel with long-handled, two-tined blubber forks. These forks were used to pitch the pieces of minced blubber into the hot try-pots to boil it down into oil. The long handles prevented sore backs from too much bending over and protected the men from getting too close to the boiling oil.
- date made
- mid-1800s
- ID Number
- AG*055818
- catalog number
- 055818
- accession number
- 012285
- Data Source
- National Museum of American History, Kenneth E. Behring Center
Whaler's Allen's Gun Harpoon
- Description
- In the later 19th century, guns with explosive charges shooting the harpoons took the place of hand tools for catching and killing whales. They were much safer, for they could be shot at a whale from greater distances than a hand lance could be applied. They also penetrated the whale’s skin deeper and were harder for the animal to dislodge.
- Gun harpoons were also far more efficient, for the steam whalers could approach the prey directly and did not need labor-intensive whaleboats and their highly trained crews any longer.
- Designed to be fired from a shoulder gun, this nonexplosive style of harpoon was invented by Oliver Allen of Norwich, Conn. to fasten to whales prior to killing.
- date made
- mid-1800s
- harpoons replaced hand tools
- late 19th century
- patentee
- Allen, Oliver
- inventor
- Allen, Oliver
- ID Number
- AG*056230
- catalog number
- 056230
- accession number
- 012333
- patent number
- 5949
- Data Source
- National Museum of American History, Kenneth E. Behring Center
Whaler's Harpoon with Toggle Head
- Description
- The first step in catching a whale was throwing at least two sharp harpoons into its back, to ensure that the whaleboat was securely fastened to its prey. Harpoon shafts were made of soft wrought iron, so that they would bend and not break off when twisted, which risked losing the wounded whale.
- A line at the bottom of the harpoon’s wooden handle attached it to the whaleboat. Once in the whale’s flesh, the sharp toggle tip swiveled sideways, making it harder for the tip of the weapon to pull out. Whales normally dove deep after the first prick, to try and escape the sharp jab from the surface of the ocean. This harpoon shaft was twisted by a descending whale.
- date made
- 1882
- maker
- D. & D.
- ID Number
- AG*056237
- catalog number
- 056237
- accession number
- 012284
- Data Source
- National Museum of American History, Kenneth E. Behring Center
Whale Harpoons, or Temple Toggle Irons
- Description
- While the African American blacksmith and former slave Lewis Temple did not invent the harpoon toggle, his invention made it better. The first barb at the tip of the toggle iron was designed to penetrate the whale’s flesh. The second barb also went straight in. A small wooden peg holding the lower barb in place would then break when the whale pulled away, allowing the barbed head to swivel away from the shaft. The new T-shape of the barb prevented the dart from pulling out of its wound.
- It was a harpooner’s responsibility to keep his tools sharp and well lubricated, to ensure that the toggle swiveled freely. Sometimes the men fashioned covers for the heads of their harpoons to keep them clean and dry until needed for use.
- One of these irons, or gigs, is shown in the closed position for entering the whale’s flesh; the other is toggled open to show how much harder it was to pull out.
- Date made
- 1882
- inventor
- Temple, Lewis
- ID Number
- AG*056244
- catalog number
- 056244
- accession number
- 012284
- Data Source
- National Museum of American History, Kenneth E. Behring Center