Industry & Manufacturing - Overview
The Museum's collections document centuries of remarkable changes in products, manufacturing processes, and the role of industry in American life. In the bargain, they preserve artifacts of great ingenuity, intricacy, and sometimes beauty.
The carding and spinning machinery built by Samuel Slater about 1790 helped establish the New England textile industry. Nylon-manufacturing machinery in the collections helped remake the same industry more than a century later. Machine tools from the 1850s are joined by a machine that produces computer chips. Thousands of patent models document the creativity of American innovators over more than 200 years.
The collections reach far beyond tools and machines. Some 460 episodes of the television series Industry on Parade celebrate American industry in the 1950s. Numerous photographic collections are a reminder of the scale and even the glamour of American industry.
"Industry & Manufacturing - Overview" showing 14 items.
Page 1 of 2
Gould Shaper, 1860
- Description (Brief)
- This shaper was built by Ezra Gould in his Newark, New Jersey shop, the shop later became Gould and Eberhardt, a major builder of machine tools. This shaper was used to machine flat surfaces in metal. On a shaper the cutting tool moves and the workpiece stays stationary. Conversely, in a planer the workpiece moves and the cutting tool stays stationary. This design difference allows for precise work on small pieces. This shaper could plane 6 inches long and 14 inches wide.
- Location
- Currently not on view
- date made
- ca 1860
- manufacturer
- Gould, Ezra
- ID Number
- MC*329218
- catalog number
- 329218
- accession number
- 280595
- Data Source
- National Museum of American History, Kenneth E. Behring Center
Fisherman’s Oilskin Hat
- Description
- Gloucester fishermen working on the North Atlantic were exposed to harsh weather conditions. Waves and freezing rain splashed over the decks and into the dories while the men worked. For some measure of protection, fishermen in the 19th century wore oiled clothes, the precursors to today’s waterproof foul weather gear.
- This hat, referred to as a “Cape Ann sou’wester” because of its wide use in the fisheries around Cape Ann, Mass., is made of soft oiled canvas and lined with flannel. It has an elongated brim in the back to keep water from running down the wearer’s neck and inside his clothing. Ear flaps for warmth are also part of the hat’s design.
- A catalog from the 1883 International Fisheries Exhibition in London claimed that with the sou’wester, “no class of seamen were so comfortably clothed as the New England fishermen.” At the time of the exhibition’s opening, sou’westers cost about $6.50 per dozen.
- This Cape Ann sou’wester was displayed at the London exhibition, courtesy of its manufacturer, A. J. Tower of Boston, Mass. It was part of a display of the latest gear used and worn by American fishermen.
- date made
- early 1880s
- used
- late 19th century
- on exhibit
- 1883
- ID Number
- 2009.0157.03
- catalog number
- 102126
- accession number
- 2009.0157
- Data Source
- National Museum of American History, Kenneth E. Behring Center
Whaler's Allen's Gun Harpoon
- Description
- In the later 19th century, guns with explosive charges shooting the harpoons took the place of hand tools for catching and killing whales. They were much safer, for they could be shot at a whale from greater distances than a hand lance could be applied. They also penetrated the whale’s skin deeper and were harder for the animal to dislodge.
- Gun harpoons were also far more efficient, for the steam whalers could approach the prey directly and did not need labor-intensive whaleboats and their highly trained crews any longer.
- Designed to be fired from a shoulder gun, this nonexplosive style of harpoon was invented by Oliver Allen of Norwich, Conn. to fasten to whales prior to killing.
- date made
- mid-1800s
- harpoons replaced hand tools
- late 19th century
- patentee
- Allen, Oliver
- inventor
- Allen, Oliver
- ID Number
- AG*056230
- catalog number
- 056230
- accession number
- 012333
- patent number
- 5949
- Data Source
- National Museum of American History, Kenneth E. Behring Center
Whaler's Harpoon with Toggle Head
- Description
- The first step in catching a whale was throwing at least two sharp harpoons into its back, to ensure that the whaleboat was securely fastened to its prey. Harpoon shafts were made of soft wrought iron, so that they would bend and not break off when twisted, which risked losing the wounded whale.
- A line at the bottom of the harpoon’s wooden handle attached it to the whaleboat. Once in the whale’s flesh, the sharp toggle tip swiveled sideways, making it harder for the tip of the weapon to pull out. Whales normally dove deep after the first prick, to try and escape the sharp jab from the surface of the ocean. This harpoon shaft was twisted by a descending whale.
- date made
- 1882
- maker
- D. & D.
- ID Number
- AG*056237
- catalog number
- 056237
- accession number
- 012284
- Data Source
- National Museum of American History, Kenneth E. Behring Center
Whaler's Hand Lance
- Description
- After harpoons fastened the whale and whaleboat together, a whale was given plenty of time and rope to dive, try to swim away, and otherwise wear itself out. Once the exhausted animal returned to the surface to breathe, the whaleboat approached it, and a hand lance, also known as a killing iron, was used to actually dispatch the animal.
- Hand lances had long shafts, to allow the point to penetrate deep into the whale’s body in search of the thick neck arteries. The tips of the killing irons were leaf or oval shaped and extremely sharp, so that they cut on the way in and on the way out, and were easier to remove and stab repeatedly. Cutting the neck arteries prevented the animal from deep diving and hastened its bleeding to death.
- This nickel-plated example was manufactured and donated by Luther Cole of Fairhaven, Mass.
- Date made
- 1880s
- maker
- Cole, Luther
- ID Number
- AG*056357
- accession number
- 012326
- catalog number
- 056357
- Data Source
- National Museum of American History, Kenneth E. Behring Center
Fishermen’s Woolen Nippers
- Description
- Fishermen working trawl lines in the 19th century often suffered cuts and rope burns on their hands. They typically wore mittens or gloves to protect themselves when hauling the long lines aboard and removing the fish. These sturdy but soft rings, called nippers, are knitted of woolen yarn and stuffed with more wool. They would have fit around a fisherman’s palms, protecting his hands while his fingers remained free for tasks requiring dexterity.
- These nippers were probably made in Gloucester, Mass., for use by local fishermen working on offshore schooners. The shallow, fertile banks stretching from Georges Bank east of Nantucket to the Grand Bank off Newfoundland, Canada, were prime fishing areas for Gloucestermen. Cod, haddock, and halibut were the principal species caught by fishermen working aboard schooners in these waters in the late 19th century.
- These nippers were among the fishermen’s clothing, tools, and apparatus featured by the United States in the 1883 International Fisheries Exhibition in London.
- Date made
- 1880s
- used
- late 19th century
- on exhibit
- 1883
- ID Number
- AG*102074
- catalog number
- 102074
- accession number
- 2009.0157
- Data Source
- National Museum of American History, Kenneth E. Behring Center
1849 Bachelder's Patent Model of a Sewing Machine
- Description
- Sewing Machine Patent Model
- Patent No. 6439, issued May 8, 1849
- John Bachelder of Boston, Massachusetts
- John Bachelder of Boston, Massachusetts, submitted this sewing machine patent model for his Patent No. 6439, which was granted on May 8, 1849. Bachelder’s machine sewed with a chain-stitch. He did not claim this chain-stitch mechanism as it was patented earlier in February in 1849 by Charles Morey and Joseph B. Johnson of Massachusetts. Instead he focused on improving the cloth feed. On this model, Bachelder used a wide continuous leather belt inserted with sharp pins to hold the cloth and enable the leather belt to move the cloth forward as it was being sewn. After being stitched, the fabric would be disengaged from the points by a curved piece of metal. This was the first patent for a continuous sewing, intermittent feeding mechanism.
- Although Bachelder did not manufacture his sewing machine, his patent and later reissues of it were bought by I. M. Singer, and became one of the central patents to form the Sewing Machine Combination in 1856. This organization consisted of three sewing machine manufacturers, I. M. Singer Co., Wheeler & Wilson Co., and the Grover & Baker Co., and the inventor, Elias Howe Jr., who all agreed to pool their important patents and stop patent litigations between them. This allowed them to move ahead with manufacturing and marketing of their own sewing machine and collect license fees from other companies wanting to use their patents.
- Location
- Currently not on view
- model constructed
- before 1849-05-08
- patent date
- 1849-05-08
- inventor
- Bachelder, John
- ID Number
- TE*T06051
- catalog number
- T06051.000
- patent number
- 006439
- accession number
- 89797
- Data Source
- National Museum of American History, Kenneth E. Behring Center
Whaler's Fluke Lance
- Description
- The most dangerous act in the dangerous business of whaling was “spading flukes.” The whaleboat drew up close alongside a desperate, unpredictable whale on the water surface, and a crewman used a boat spade or fluke lance to sever the whale’s tail tendons. This effectively immobilized the prey, for the whale couldn’t swim without its tail.
- According to James Temple Brown, who wrote the 1883 catalog of the Smithsonian’s whaling collection, the fluke lance was exceedingly rare and was regarded as “a monstrosity by all the fraternity”. This rare inscribed example was used aboard the starboard whaleboat of the bark Sea Fox.
- Date made
- ca 1880-1889
- authored whaling reference material
- Brown, James Temple
- maker
- Driggs, James D.
- ID Number
- TR*056358
- catalog number
- 056358
- accession number
- 012298
- Data Source
- National Museum of American History, Kenneth E. Behring Center
Wooden-handled Harpoon
- Description
- In the 18th and early 19th centuries, simple sharp-barbed harpoons on long wooden shafts were used to “dart” or fasten to the whales from whaleboats. Two darts were thrown, in case one broke loose. Then, sometime in the early 19th century, the toggle iron was developed, possibly by African American blacksmith Lewis Temple in New Bedford, MA.
- Once embedded in the whale’s flesh, the sharp point of a toggle iron rotated, or toggled sideways, making it harder to pull out. Normally, at least six sharp darting irons were carried aboard individual whaleboats to ensure that lost or broken ones could be replaced without returning to the mother ship.
- ID Number
- TR*072824
- catalog number
- 072824
- accession number
- 10616
- Data Source
- National Museum of American History, Kenneth E. Behring Center
Harpoon
- Description
- In the 18th and early 19th centuries, simple sharp-barbed harpoons on long wooden shafts were used to “dart” or fasten to the whales from whaleboats. Two darts were thrown, in case one broke loose. Then, sometime in the early 19th century, the toggle iron was developed, possibly by African American blacksmith Lewis Temple in New Bedford, MA.
- Once embedded in the whale’s flesh, the sharp point of a toggle iron rotated, or toggled sideways, making it harder to pull out. Normally, at least six sharp darting irons were carried aboard individual whaleboats to ensure that lost or broken ones could be replaced without returning to the mother ship.
- ID Number
- TR*072824B
- catalog number
- 072824B
- accession number
- 10616
- Data Source
- National Museum of American History, Kenneth E. Behring Center