Measuring & Mapping - Overview

Where, how far, and how much? People have invented an astonishing array of devices to answer seemingly simple questions like these. Measuring and mapping objects in the Museum's collections include the instruments of the famous—Thomas Jefferson's thermometer and a pocket compass used by Meriwether Lewis and William Clark on their expedition across the American West. A timing device was part of the pioneering motion studies of Eadweard Muybridge in the late 1800s. Time measurement is represented in clocks from simple sundials to precise chronometers for mapping, surveying, and finding longitude. Everyday objects tell part of the story, too, from tape measures and electrical meters to more than 300 scales to measure food and drink. Maps of many kinds fill out the collections, from railroad surveys to star charts.
"Measuring & Mapping - Overview" showing 17 items.
Page 1 of 2
David White Geologist's or Forester's Compass
- Description
- This is an aluminum compass with brass sights. The raised rim and beveled outer ring are graduated every degree and numbered every 10 degrees in quadrants from north and south. The southeast quadrant of the face has a variation scale that extends 25 degrees one way and 45 degrees the other, that is graduated to degrees, and that reads by folded vernier to 5 minutes. The western half of the face is graduated to degrees, and equipped with a pendulum clinometer pivoted at the center. There are level vials on the SE and SW corners of the plate. The four beveled edges of the plate are graduated, one to inches and tenths, one to inches and eighths, and two as protractors. The back of the plate has a diagram showing the arrangement of township numbering. David White Co. termed it an improved geologist's or forester's compass as designed for the U. S. Forest Service. This example belonged to the University of Missouri at Columbia. New, it cost $45. The "David White Co. Milwaukee, Wis." signature refers to a firm that was established in 1895, and renamed the David White Instrument Co. in 1956.
- Ref: David White Co., Catalog and Price List, 7th edition (Denver, about 1935), p. 37.
- maker
- David White Co.
- ID Number
- PH*333646
- catalog number
- 333646
- accession number
- 300659
- Data Source
- National Museum of American History, Kenneth E. Behring Center
- No Image Available
David White Theodolite
- Description
- This 9-inch theodolite was made for the U. S. Coast and Geodetic Survey, and designed for first order triangulation. It dates from the mid-1930s. New, it cost $2,175. It is marked "David White Co. Milwaukee Wis. No. 9049" and "USC&GS No. G362." The horizontal circle is graduated to degrees, and read by opposite micrometers with drum dials to 30 seconds. The vertical circle is graduated to 10 minutes, and read by opposite verniers and magnifiers to single minutes. The David White Co. was established in 1895, and renamed the David White Instrument Co. in 1956.
- Ref: David White Co., Catalog A, 7th edition (Milwaukee, Wisconsin, about 1937), pp. 103-104.
- maker
- David White Co.
- ID Number
- 1986.0395.11
- accession number
- 1986.0395
- catalog number
- 1986.0395.11
- Data Source
- National Museum of American History, Kenneth E. Behring Center
- No Image Available
Badger CI-IOX Water Meter
- Description
- This is a disc water meter made by the Badger Meter Manufacturing Company in Milwaukee, Wisc. It has a frost-proof bottom, fits a ⅝” pipe, and has a capacity of 26 gallons per minute. The serial number (2,335,475) dates from 1942.
- date made
- ca 1942
- maker
- Badger Meter Manufacturing Company
- ID Number
- PH*325801
- accession number
- 245003
- catalog number
- 325801
- Data Source
- National Museum of American History, Kenneth E. Behring Center
- No Image Available
Badger CC Water Meter
- Description
- This is a disc water meter made by the Badger Meter Manufacturing Company in Milwaukee, Wisc. It fits a ⅝” pipe and has a capacity of 26 gallons per minute. The serial number is no longer legible.
- According to the firm, this meter was “so constructed that the current of water completely fills the receptacle both above and below the measuring mechanism. The entire chamber is thus constantly flushed, preventing the secretion of sediment which might injuriously affect the working of the meter, or the unsanitary stagnation of water in a blind pocket.” The frost-proof bottom is a “plate of soft gray cast iron thoroughly galvanized and rust proof, with a low breaking strength of 600 pounds.” If the water in the meter should freeze, the bottom plate would break, “thus relieving all strain long before the pressure has reached a point where it is dangerous to the interior parts.”
- Ref: Badger Meter Manufacturing Company, Badger Water Meters<\i> (about 1925)
- date made
- ca 1904-ca 1960
- maker
- Badger Meter Manufacturing Company
- ID Number
- PH*325803
- accession number
- 245003
- catalog number
- 325803
- Data Source
- National Museum of American History, Kenneth E. Behring Center
- No Image Available
Badger SC-IOT Water Meter
- Description
- This is disc water meter was made by the Badger Meter Manufacturing Company in Milwaukee, Wisc. It fits a ⅝” pipe, has a capacity of 26 gallons per minute, and was designed for use with corrosive waters. SC-IOT refers to a split case, interchangeable oil gear train. The serial number (2,636,483) dates from 1946.
- date made
- ca 1946
- maker
- Badger Meter Manufacturing Company
- ID Number
- PH*325804
- accession number
- 245003
- catalog number
- 325804
- Data Source
- National Museum of American History, Kenneth E. Behring Center
- No Image Available
Badger SC-SOT Water Meter
- Description
- This disc water meter was made by the Badger Meter Manufacturing Company in Milwaukee, Wisc. SC-SOT stands for split case, sealed oil gear train.The split case could be used in warmer climates where there was no danger of freezing. It fits a ⅝” pipe, has a capacity of 26 gallons per minute, and was designed for use with corrosive waters. The serial number (828,438) dates from 1929.
- date made
- ca 1929
- maker
- Badger Meter Manufacturing Company
- ID Number
- PH*325806
- accession number
- 245003
- catalog number
- 325806
- Data Source
- National Museum of American History, Kenneth E. Behring Center
- No Image Available
Badger A-SOT Water Meter
- Description
- This disc water meter was made by the Badger Meter Manufacturing Company in Milwaukee, Wisc. It fits a ⅝” pipe, and has a capacity of 26 gallons per minute. It has a frost-proof bottom, and could be used with corrosive waters. There is no serial number. A-SOT refers to sealed oil gear train.
- date made
- ca 1904-ca 1960
- maker
- Badger Meter Manufacturing Company
- ID Number
- PH*325807
- accession number
- 245003
- catalog number
- 325807
- Data Source
- National Museum of American History, Kenneth E. Behring Center
- No Image Available
Badger JET Water Meter
- Description
- This turbine water meter was made by the Badger Meter Manufacturing Company in Milwaukee, Wisc. It has a split case and so could be used in areas where water did not normally freeze. The serial number (1,217,214) dates from 1934.
- date made
- ca 1934
- maker
- Badger Meter Manufacturing Company
- ID Number
- PH*325808
- accession number
- 245003
- catalog number
- 325808
- Data Source
- National Museum of American History, Kenneth E. Behring Center
- No Image Available
Badger Water Meter with Magnetic Drive
- Description
- This turbine water meter was made by the Badger Meter Manufacturing Company in Milwaukee, Wisc. The serial number (1,889,599 ) dates from 1940. According to the donor, the first Badger magnetic-drive meters built on a production line basis were not introduced until the late 1950s. This example was probably specially built for an individual customer. Research on magnetic-drive motors began in the 1930s.
- date made
- ca 1940
- maker
- Badger Meter Manufacturing Company
- ID Number
- PH*325809
- accession number
- 245003
- catalog number
- 325809
- Data Source
- National Museum of American History, Kenneth E. Behring Center
- No Image Available
Badger Multijet Water Meter
- Description
- This turbine water meter was made by the Badger Meter Manufacturing Company in Milwaukee, Wisc. The serial number (1,329,421) dates from 1936. It fits ⅝” or ¾” pipes, and has a capacity of 17.5 gallons per minute.
- date made
- ca 1936
- maker
- Badger Meter Manufacturing Company
- ID Number
- PH*325810
- accession number
- 245003
- catalog number
- 325810
- Data Source
- National Museum of American History, Kenneth E. Behring Center

