Transportation - Overview
Americans have always been a people on the move—on rails, roads, and waterways (for travel through the air, visit the National Air and Space Museum). In the transportation collections, railroad objects range from tools, tracks, and many train models to the massive 1401, a 280-ton locomotive built in 1926. Road vehicles include coaches, buggies, wagons, trucks, motorcycles, bicycles, and automobiles—from the days before the Model T to modern race cars. The accessories of travel are part of the collections, too, from streetlights, gas pumps, and traffic signals to goggles and overcoats.
In the maritime collections, more than 7,000 design plans and scores of ship models show the evolution of sailing ships and other vessels. Other items range from scrimshaw, photographs, and marine paintings to life jackets from the Titanic.
"Transportation - Overview" showing 42 items.
Page 1 of 5
Whaleship Skimmer
- Description
- After a whale’s blubber was melted down into oil in the try-pots, a few solids, like skin and gristle, remained floating on the surface of the oil. These were removed with a skimmer. The tool’s long handle helped keep the crew from being burned or splashed with hot oil. The leftover oily pieces of flesh, or “fritters,” were then tossed under the pots and recycled into fuel to keep the fires burning.
- date made
- 1880s
- ID Number
- 1990.0018.066
- catalog number
- 1990.0018.066
- accession number
- 1990.0018
- Data Source
- National Museum of American History, Kenneth E. Behring Center
Whaler's Chopper
- Description
- After the whale skin and attached fat, together called blubber, was hauled aboard the mother ship for processing in large strips, it was chopped into small pieces with different tools to expose more surface area to the melting heat of the boiling oil in the try-pot. This chopper was one of those tools.
- ID Number
- 1990.0018.085
- catalog number
- 1990.0018.085
- accession number
- 1990.0018
- Data Source
- National Museum of American History, Kenneth E. Behring Center
New England Whale Ship
- Description
- This model represents a typical Massachusetts whaleship of the mid-19th century, fully rigged and ready for a long cruise that might last for as much as four years. The name “U.S. Grant, Edgartown” on the ship’s stern is fictional—no ship by that name ever sailed for the whaling fleet. The ship’s bottom is lined with copper sheathing, to keep out the teredo navalis, a tropical worm that bored into the wood of ship’s hulls and weakened the structure, as the termite does to wooden structures on land.
- The whaleboats are the most prominent features. After whales were sighted by lookouts perched at the mast tops, the boats were dropped over the sides of the mother ship to chase them. Also over the side are the cutting stages, where the whale’s fat, or blubber, was sliced off the body in long strips.
- The main feature on the ship’s deck is the try-works, or giant pots set into a brick framework, where the whale’s blubber, was boiled down into oil. After the blubber became liquid, it was drawn off to cool and then poured into heavy barrels and stored below in the ship’s cargo hold.
- This model was purchased in 1875 at Edgartown, on the island of Martha’s Vineyard, Mass.; it was one of the first objects in the Smithsonian’s National Watercraft Collection.
- Date made
- 1875
- model was purchased
- 1875
- ID Number
- TR*025726
- catalog number
- 025726
- accession number
- 4353
- Data Source
- National Museum of American History, Kenneth E. Behring Center
Pacific Steam Whaleship Orca
- Description
- The steam whaler Orca was built at San Francisco in 1882 specifically for the Pacific and Arctic whale fisheries. By the late 19th century, the Atlantic whale was too scarce due to overhunting, and whaling had moved almost completely to distant western waters to exploit the remaining whales.
- Measuring 177 feet in length and 628 tons, Orca had a 280-HP steam engine for propulsion. It also had a full suit of auxiliary sails for backup and fuel conservation. When built, Orca was the largest auxiliary steam whaler in the United States.
- The bark-rigged vessel was heavily built and braced, with a strongly raked bow to work in the Arctic ice pack. The heavy timbers and bow shape allowed it to be driven up onto the ice, where its weight helped to break through. Orca’s propeller had two blades so it could be aligned vertically with the stern timbers when not in use in order to protect it from the ice.
- Information collected by Mystic Seaport Museum in Mystic, Conn. indicates that Orca, along with many other Pacific whalers, resorted to shanghaiing, or acquiring crewmen from agents ashore who forced potential crewmen onto their ships in various ways. With around two dozen whaleships clearing San Francisco each year for the Pacific whaling grounds, the need for crewmen was great.
- Date made
- 1894
- reference material
- Mystic Seaport Museum
- ID Number
- TR*076237
- catalog number
- 076237
- accession number
- 028022
- Data Source
- National Museum of American History, Kenneth E. Behring Center
Ship Model, Skipjack Gertrude Wands
- Description
- The skipjack is the last in a long line of sailing craft designed for work in the Chesapeake Bay oyster industry. First built in the late 1800s, this sloop-rigged, single masted vessel was easy to maneuver even in light winds, and its V-shaped hull allowed oystermen to work in shallow waters. This model represents the Gertrude Wands, a skipjack built by John Branford on the Eastern Shore of Maryland in 1899. It is named after a little girl who lived in the community of Inverness.
- Like bugeyes, skipjacks were built for oyster dredging under sail. But unlike the round-bottomed bugeye, the skipjack had a V-shaped hull, which was easier to build and did not require the huge logs of the traditional bugeye. Skipjacks were also smaller than bugeyes, ranging in size from 25 to 50 feet.
- By the early 20th century, skipjacks had replaced bugeyes and were the main dredging craft on the bay. An 1865 Maryland law restricting dredging to sail-powered vessels ensured the continued use of sailing craft for oystering. Only in 1967 was the law amended to allow the use of a gasoline-powered push boat on Mondays and Tuesdays of each week. A push boat is shown on davits at the stern (back) of this model.
- Maryland’s skipjacks are the last commercial fishing boats operating under sail in North America. In 1985, the skipjack was named Maryland’s official state boat. With the steep decline of the oyster population in the Chesapeake Bay, most skipjacks have become floating classrooms for public education programs about the bay. Several have been donated to museums for preservation. Still, many people who live in the Chesapeake region harbor a sense of longing and nostalgia for the days when the large white sails of skipjacks filled the horizon.
- date made
- 1968
- date Gertrude Wands was built
- 1899
- built Gertrude Wands
- Branford, John
- ID Number
- TR*328687
- accession number
- 276670
- catalog number
- 328687
- Data Source
- National Museum of American History, Kenneth E. Behring Center
Temple Toggle Iron
- Description
- Very little is known of Lewis Temple's early life. Born around 1800 to slave parents in Richmond, Virginia , by 1829 he had moved to New Bedford, Massachusetts, where he married. By 1836, he had a blacksmith shop on a local wharf, where he made shipsmithing items like spikes, harpoons, rigging elements, cargo hooks, barrel hoop and other iron ship fittings.
- Temple developed a simple but significant refinement to the harppon: the so-called Temple toggle iron or gig. This feature at the tip of a harpoon offered a more secure way to hook into a whale. Unfortunately, Temple never patented his idea, which swiftly achieved widespread application throughout the world's whale fisheries. He died in May 1854, unrecognized and in debt.
- While Lewis Temple did not invent the toggle, his invention made it better. The first barb at the tip of the dart was designed to penetrate the whale's flesh, and the second barb also went straight in. A small wooden peg holding the lower barb in place would then break when the whale pulled away, allowing the barbed head to swivel away from the shaft. The new T-shape of the barb prevented the dart from pulling out of its wound.
- date made
- ca 1859
- inventor
- Temple, Lewis
- ID Number
- TR*330535A
- catalog number
- 330535a
- accession number
- 294088
- Data Source
- National Museum of American History, Kenneth E. Behring Center
Scrimshaw Ivory Whale Stamp
- Description
- Carved from the teeth of captured sperm whales, whale stamps were used to record the type of whale and number of barrels of oil they yielded.
- The stamps were inked onto the page of whaleship logbooks or sailors’ journals, with an empty space in the whale’s body for writing in the number of barrels. This example in the form of a sperm whale is decorated with steel pin heads and a turned handle.
- date made
- 1800s
- ID Number
- 1978.0052.06
- accession number
- 1978.0052
- catalog number
- 1978.52.6
- Data Source
- National Museum of American History, Kenneth E. Behring Center
Wood and Ivory Parallel Rule
- Description
- Part of the navigator’s tool kit, parallel rules were used to transfer compass points, course lines and other directional information across large charts without change. This large wooden set has a carved ivory whale inlaid into its surface, with a brass tack for the whale’s eye.
- ID Number
- 1978.0052.08
- accession number
- 1978.0052
- catalog number
- 1978.52.31
- Data Source
- National Museum of American History, Kenneth E. Behring Center
Whaler's Head Spade
- Description
- Once a whale was caught, killed, and brought alongside the mother ship, the outer flesh and fat layer, or blubber, was peeled off the carcass. Then the remains were drawn onto the vessel’s deck for further processing.
- The heavy head spade was used for decapitating the whale, by chopping through the vertebrae at the base of the animal’s skull. Then the head and bone could be further processed.
- ID Number
- 1990.0018.102
- catalog number
- 1990.0018.102
- accession number
- 1990.0018
- Data Source
- National Museum of American History, Kenneth E. Behring Center
Ambergris
- Description
- Pound for pound, ambergris was the most valuable product produced by the whale. It was—and is—also the rarest and most enigmatic whale product. An opaque, waxy substance from a sperm whale’s intestines, it was found occasionally in the stomachs of whales being processed on whale ships. More commonly, it was found floating on the surface of the world’s oceans or washed up on the shore in pieces that could weigh several hundred pounds. It was used by western cultures as a fixative to prolong the scent of perfumes into the later 20th century.
- But why it is formed—and from which end of a sperm whale it is expelled—remains unknown. Fragments of squid beaks are often found inside the pieces, and some scientists believe that ambergris forms around the sharp, indigestible squid beaks to prevent irritating or cutting a whale’s intestines. Others consider it the cetacean equivalent of human gallstones.
- ID Number
- 1991.0083.01
- catalog number
- 1991.0083.01
- accession number
- 1991.0083
- Data Source
- National Museum of American History, Kenneth E. Behring Center