Work - Overview
The tools, rules, and relationships of the workplace illustrate some of the enduring collaborations and conflicts in the everyday life of the nation. The Museum has more than 5,000 traditional American tools, chests, and simple machines for working wood, stone, metal, and leather. Materials on welding, riveting, and iron and steel construction tell a more industrial version of the story. Computers, industrial robots, and other artifacts represent work in the Information Age.
But work is more than just tools. The collections include a factory gate, the motion-study photographs of Frank and Lillian Gilbreth, and more than 3,000 work incentive posters. The rise of the factory system is measured, in part, by time clocks in the collections. More than 9,000 items bring in the story of labor unions, strikes, and demonstrations over trade and economic issues.
"Work - Overview" showing 6 items.
Whaler's Allen's Gun Harpoon
- Description
- In the later 19th century, guns with explosive charges shooting the harpoons took the place of hand tools for catching and killing whales. They were much safer, for they could be shot at a whale from greater distances than a hand lance could be applied. They also penetrated the whale’s skin deeper and were harder for the animal to dislodge.
- Gun harpoons were also far more efficient, for the steam whalers could approach the prey directly and did not need labor-intensive whaleboats and their highly trained crews any longer.
- Designed to be fired from a shoulder gun, this nonexplosive style of harpoon was invented by Oliver Allen of Norwich, Conn. to fasten to whales prior to killing.
- date made
- mid-1800s
- harpoons replaced hand tools
- late 19th century
- patentee
- Allen, Oliver
- inventor
- Allen, Oliver
- ID Number
- AG*056230
- catalog number
- 056230
- accession number
- 012333
- patent number
- 5949
- Data Source
- National Museum of American History, Kenneth E. Behring Center
Whaler's Harpoon with Toggle Head
- Description
- The first step in catching a whale was throwing at least two sharp harpoons into its back, to ensure that the whaleboat was securely fastened to its prey. Harpoon shafts were made of soft wrought iron, so that they would bend and not break off when twisted, which risked losing the wounded whale.
- A line at the bottom of the harpoon’s wooden handle attached it to the whaleboat. Once in the whale’s flesh, the sharp toggle tip swiveled sideways, making it harder for the tip of the weapon to pull out. Whales normally dove deep after the first prick, to try and escape the sharp jab from the surface of the ocean. This harpoon shaft was twisted by a descending whale.
- date made
- 1882
- maker
- D. & D.
- ID Number
- AG*056237
- catalog number
- 056237
- accession number
- 012284
- Data Source
- National Museum of American History, Kenneth E. Behring Center
Whale Harpoons, or Temple Toggle Irons
- Description
- While the African American blacksmith and former slave Lewis Temple did not invent the harpoon toggle, his invention made it better. The first barb at the tip of the toggle iron was designed to penetrate the whale’s flesh. The second barb also went straight in. A small wooden peg holding the lower barb in place would then break when the whale pulled away, allowing the barbed head to swivel away from the shaft. The new T-shape of the barb prevented the dart from pulling out of its wound.
- It was a harpooner’s responsibility to keep his tools sharp and well lubricated, to ensure that the toggle swiveled freely. Sometimes the men fashioned covers for the heads of their harpoons to keep them clean and dry until needed for use.
- One of these irons, or gigs, is shown in the closed position for entering the whale’s flesh; the other is toggled open to show how much harder it was to pull out.
- Date made
- 1882
- inventor
- Temple, Lewis
- ID Number
- AG*056244
- catalog number
- 056244
- accession number
- 012284
- Data Source
- National Museum of American History, Kenneth E. Behring Center
Whaler's Hand Lance
- Description
- After harpoons fastened the whale and whaleboat together, a whale was given plenty of time and rope to dive, try to swim away, and otherwise wear itself out. Once the exhausted animal returned to the surface to breathe, the whaleboat approached it, and a hand lance, also known as a killing iron, was used to actually dispatch the animal.
- Hand lances had long shafts, to allow the point to penetrate deep into the whale’s body in search of the thick neck arteries. The tips of the killing irons were leaf or oval shaped and extremely sharp, so that they cut on the way in and on the way out, and were easier to remove and stab repeatedly. Cutting the neck arteries prevented the animal from deep diving and hastened its bleeding to death.
- This nickel-plated example was manufactured and donated by Luther Cole of Fairhaven, Mass.
- Date made
- 1880s
- maker
- Cole, Luther
- ID Number
- AG*056357
- accession number
- 012326
- catalog number
- 056357
- Data Source
- National Museum of American History, Kenneth E. Behring Center
Wooden-handled Harpoon
- Description
- In the 18th and early 19th centuries, simple sharp-barbed harpoons on long wooden shafts were used to “dart” or fasten to the whales from whaleboats. Two darts were thrown, in case one broke loose. Then, sometime in the early 19th century, the toggle iron was developed, possibly by African American blacksmith Lewis Temple in New Bedford, MA.
- Once embedded in the whale’s flesh, the sharp point of a toggle iron rotated, or toggled sideways, making it harder to pull out. Normally, at least six sharp darting irons were carried aboard individual whaleboats to ensure that lost or broken ones could be replaced without returning to the mother ship.
- ID Number
- TR*072824
- catalog number
- 072824
- accession number
- 10616
- Data Source
- National Museum of American History, Kenneth E. Behring Center
Harpoon
- Description
- In the 18th and early 19th centuries, simple sharp-barbed harpoons on long wooden shafts were used to “dart” or fasten to the whales from whaleboats. Two darts were thrown, in case one broke loose. Then, sometime in the early 19th century, the toggle iron was developed, possibly by African American blacksmith Lewis Temple in New Bedford, MA.
- Once embedded in the whale’s flesh, the sharp point of a toggle iron rotated, or toggled sideways, making it harder to pull out. Normally, at least six sharp darting irons were carried aboard individual whaleboats to ensure that lost or broken ones could be replaced without returning to the mother ship.
- ID Number
- TR*072824B
- catalog number
- 072824B
- accession number
- 10616
- Data Source
- National Museum of American History, Kenneth E. Behring Center