Work - Overview
The tools, rules, and relationships of the workplace illustrate some of the enduring collaborations and conflicts in the everyday life of the nation. The Museum has more than 5,000 traditional American tools, chests, and simple machines for working wood, stone, metal, and leather. Materials on welding, riveting, and iron and steel construction tell a more industrial version of the story. Computers, industrial robots, and other artifacts represent work in the Information Age.
But work is more than just tools. The collections include a factory gate, the motion-study photographs of Frank and Lillian Gilbreth, and more than 3,000 work incentive posters. The rise of the factory system is measured, in part, by time clocks in the collections. More than 9,000 items bring in the story of labor unions, strikes, and demonstrations over trade and economic issues.
"Work - Overview" showing 3404 items.
Page 331 of 341
Factory Processor’s Rain Pants
- Description
- Fish processors aboard trawlers like the Alaska Ocean wear waterproof pants over their coveralls and other clothing to protect themselves from the water and fish slime that are constant companions in the factory. This pair is dark blue, the same as those worn by deck hands. These pants are small and were worn by processor Thelma McFarland in the summer 2007 season.
- date made
- 2007
- used
- 2007
- used
- McFarland, Thelma
- maker
- Helly Hansen
- ID Number
- 2007.0178.21
- catalog number
- 2007.0178.21
- accession number
- 2007.0178
- Data Source
- National Museum of American History, Kenneth E. Behring Center
Block Pan for Freezing Fish
- Description
- This shallow, metal pan was used for freezing processed fish aboard the factory trawler Alaska Ocean. Operating in the North Pacific and the Bering Sea, the Alaska Ocean is one vessel in the fleet that catches and processes pollock, hake, and whiting.
- In the factory the fish are gutted and filleted by German-made filleting machines, which can be calibrated to remove the bones and skin according to a customer’s preference. Onboard engineers adjust the angles of the knives within a quarter of a millimeter to provide a product with a small amount of fat, or no fat at all, depending on the customer’s specifications.
- After the initial filleting, workers in the factory load pans like this with fish fillets, fish roe, or minced fish. A conveyor belt carries the filled pans to other workers who load them into plate freezers. After about two hours, when the freezing is complete, the pans are unloaded from the freezer, and the blocks of frozen fish are removed and packed for shipment. The packed blocks of product are stacked in the ship’s large freezer hold until they can be offloaded ashore.
- The Alaska Ocean carries two sizes of pans, a block pan like this and a slightly larger size for surimi, a type of fish paste used in making imitation crabmeat. The vessel carries a total of 2800 pans, 1400 of each size. The factory has 16 plate freezers aboard, 8 for single pans and 8 for doubles. A single-pan plate freezer can hold 102 surimi pans and 119 block pans at a time.
- The wax lining in this pan facilitates removing the frozen product. This one is marked “M” for mince, a ground fish product used in making fish sticks and fish fingers.
- date made
- 2000-2005
- Associated Date
- 2007
- ID Number
- 2007.0178.29
- catalog number
- 2007.0178.29
- accession number
- 2007.0178
- Data Source
- National Museum of American History, Kenneth E. Behring Center
Ship Model, Catcher-Processor Alaska Ocean
- Description
- This scale model of the fishing vessel Alaska Ocean was custom-built for the Smithsonian by Erik A. R. Ronnberg Jr., at his shop in Rockport, Massachusetts. The starboard hull is cut away to reveal the factory where workers process tons of fish into blocks of frozen fillets, minced fish, and surimi (used in making imitation crab meat and other food products). The cutaway also shows the laboratory where fish products are tested, the freezer hold, a stateroom, and the galley. On the weather (top) deck, the model features all of the deck machinery, the trawling equipment, and the vessel’s rigging. A net full of fish is shown being emptied into one of the bins on the factory floor below.
- Ronnberg spent about 27 months building the model, and estimates he spent 5,500 hours getting every detail right. While he built the wooden hull according to design drawings provided by naval architect Guido Perla of Seattle, he had to make his own drawings and patterns to craft the machinery and equipment, most of which are cast in metal. Ronnberg used cheesecloth and tulle to make the net and spent untold hours fashioning the chafing gear out of acrylic yarn, which he knotted in bunches before separating the strands by hand.
- He studied photographs and films of the actual vessel at sea, and made detailed figures of people dressed in appropriate working gear in the factory, on the deck, in the fish hold, in the galley, and on the bridge. The model is populated with 125 figures, 1,200 individual fish, and several masses of fish in the cod end of the net. Everything on the model is painted by hand. The scale is 3/16th inch = 1 foot.
- The Alaska Ocean itself is a 376-foot-long vessel in the Seattle-based catcher-processor fleet. Workers catch, process, package, and freeze groundfish—mostly pollock and Pacific whiting—in the Bering Sea and in the waters off the coast of the Pacific Northwest. The vessel can harvest about 325 metric tons of fish per day and can freeze over 250,000 pounds of fish product daily.
- The idea to build the Alaska Ocean began in the late 1980s. Jeff Hendricks, a fisherman from Anacortes, Washington, who owned and operated a fleet of boats in partnership with a Japanese company, decided to “Americanize” his operations. This was in advance of the American Fisheries Act of 1998, which sought to increase American ownership in the fleet by requiring that vessels be American-built, owned, and operated. Although Hendricks sought bids from several American shipyards for his new venture, there were none at the time that could handle the scope of the vessel he envisioned. Eventually, he worked with a shipbuilder in Norway to expand and rebuild an American oil supply vessel. The Alaska Ocean arrived in Anacortes in the summer of 1990 and began fishing that fall with a largely local crew. It remains in the fleet and, as of 2008, is owned and operated by Glacier Fish Company.
- Because catcher-processors are so efficient, their operations are highly regulated to prevent overfishing. A harvest quota is determined by the National Marine Fisheries Service and members of the Pollock Conservation Cooperative, a group of catcher-processors including the Alaska Ocean, divide up the quota amongst themselves. This self-regulating measure ends what is often called the "race for fish," and results in more careful, less wasteful fishing.
- Independent scientific observers also travel aboard every vessel in the fleet, monitoring the trawling and empyting operations. They record all by-catch, the term for fish caught in the net other than the target species. There are hard limits on allowable by-catch for certain species, and because the data are computed, reported, and shared for the fleet as a whole, individual vessels are motivated to monitor the by-catch and make adjustments.
- date made
- 2009
- ID Number
- 2009.0080.01
- accession number
- 2009.0080
- catalog number
- 2009.0080.01
- Data Source
- National Museum of American History, Kenneth E. Behring Center
Bone Dice
- Description
- Gambling usually was banned aboard whaling ships, on the grounds that it could cause too much strife among the crew. But “bones” or dice were easily concealed from a ship’s officers, and crews found out-of-the-way places to spend their free time wagering their earnings, tobacco, or other assets.
- date made
- 1800s
- ID Number
- AG*024849.1
- accession number
- 1875.4423
- catalog number
- 24849.1
- Data Source
- National Museum of American History, Kenneth E. Behring Center
Bone Fid
- Description
- Made of hard wood, bone, or ivory and tapering to a point, fids were used mostly for ropework, such as splicing. On deck, they were also used for breaking knots that might be frozen from overtightening, wet weather, or other conditions. In a pinch, one could also serve as a temporary belaying pin to tie off a line, or even as a weapon.
- date made
- 1800s
- ID Number
- AG*025650
- catalog number
- 025650
- accession number
- 4798
- Data Source
- National Museum of American History, Kenneth E. Behring Center
Whale Bone Seam Rubber
- Description
- Seam rubbers were part of a sail maker’s tool kit. They were used to smooth and flatten the seams of heavy canvas sailcloth, where two pieces were joined or the edges were hemmed before they were sewn. This unusually large example was probably carved from the panbone, part of a whale’s jaw.
- date made
- 1800s
- ID Number
- AG*025793
- accession number
- 4957
- catalog number
- 025793
- Data Source
- National Museum of American History, Kenneth E. Behring Center
Whalebone Thimble Eye
- Description
- This rope-strapped thimble carved from whalebone would have had a light rope through the eye for rigging, perhaps on a whaleboat.
- These miniature items also served as children’s toys or curiosities back home. Toys in the form of miniature working ship parts were easy and quick for sailors to carve, and they did not require much skill to make. They also served as potent reminders of where and what the men were doing during their long absences from their friends and families.
- date made
- 1800s
- ID Number
- AG*025801
- catalog number
- 025801
- accession number
- 2009.0182
- Data Source
- National Museum of American History, Kenneth E. Behring Center
Whaler's Mincing Knife
- Description
- Whaling crews used mincing knives to cut the blubber strips into thin slices down to, but not through, the thick whale skin. This process increased the surface area of the blubber and helped it melt faster in the try-pots. Cut in this fashion, the sections of whale blubber and skin were known as “bible leaves” because they resembled the pages of a book.
- date made
- 1876
- collected
- 1876
- ID Number
- AG*025912
- accession number
- 005019
- catalog number
- 025912
- Data Source
- National Museum of American History, Kenneth E. Behring Center
Whaler's Boarding Knife
- Description
- The work of carving blubber from a whale carcass and hauling the long, narrow strips of flesh, called “blanket pieces,” aboard the ship onto the deck was called “boarding.” The boarding knife was an extremely sharp, double-edged sword blade at the end of a short wooden pole. It served a variety of purposes, from cutting a hole in the whale’s flesh for the blubber hook, to cutting the long strips of flesh into shorter sections for further processing.
- These tools were kept extremely sharp to cut the whale’s flesh easily. With the decks and tools so slippery from the whale processing, using them was reserved for the ship’s officers.
- date made
- 1876
- collected
- 1876
- ID Number
- AG*026608
- catalog number
- 026608
- accession number
- 4927
- Data Source
- National Museum of American History, Kenneth E. Behring Center
Whaler's Carved Bailer Handle
- Description
- Whalemen used long-handled bailers to remove hot whale oil from large try-pots into cooling tanks, and from those tanks into storage barrels. They had long handles to prevent the handler from being splashed or burned with molten oil.
- This example’s wooden handle has figures of whales whittled into its surface to indicate the number and species of mammals that crossed its greasy path. The “B.H.” refers to bowhead, “S” for sperm, “H.B.” for humpback, and “W” for right whale.
- date made
- 1828
- ID Number
- AG*055809
- catalog number
- 55809
- accession number
- 12284
- Data Source
- National Museum of American History, Kenneth E. Behring Center