Machinery noise on the fish deck can be deafening, and voices can get lost, no matter how loud. To make sure a message gets communicated and received, the deckhands carry radio microphones, and the fanny pack is the preferred way of keeping the instrument at hand but protected from water, dirt, and slime.
This black nylon fanny pack was worn by a deckhand working aboard the catcher-processor Alaska Ocean in the summer of 2007. He used the radio, along with a microphone clipped to his life vest for communicating with the wheelhouse and other deckhands.
The Alaska Ocean is a 376-foot-long vessel in the Seattle-based catcher-processor fleet. Workers catch, process, package, and freeze groundfish—mostly pollock and Pacific whiting—in the Bering Sea and in the waters off the coast of the Pacific Northwest.
A good, sharp knife is an essential tool for fishermen working on the fish deck of a catcher-processor. Aboard the Alaska Ocean, each deckhand carries a “Vicky,” shorthand for a Victorinox knife. This example is 7.5 inches long, including the handle. It is used for mending nets, cutting lines, and for general duties like cutting up cardboard for the on-board incinerator. The holder for this knife has weathered a lot of use, evidenced by the tape repairs.
In a June 2007 interview with deck boss Brent Walter (who was in his twelfth year working on the Alaska Ocean) and deckhands Ben Boyok and Matt Prebezac (who had been with the Alaska Ocean for seven years and two years, respectively), they agreed that net repair was the hardest part of the job. The main difficulty involves learning to conceptualize the repair. Because the net mesh is so huge, it takes time and experience to understand how to make the repair correctly. At the time, the Alaska Ocean was fishing in waters about 50 miles off the coast of Washington State and using a mid-water trawl. Repairs to the nets were minimal. The deckhands expected to do more net repair later in the season when the vessel moved to the Bering Sea, where the nets get torn from bottom-fishing.
The Alaska Ocean is a 376-foot-long vessel in the Seattle-based catcher-processor fleet. Workers catch, process, package, and freeze groundfish—mostly pollock and Pacific whiting—in the Bering Sea and in the waters off the coast of the Pacific Northwest.
This heavyweight, extra-large hooded sweatshirt was worn by one of the deck hands working aboard the Alaska Ocean catcher-processer in 2007. It features the logo of the Alaska Ship Supply store in Dutch Harbor, Alaska, a major commercial fishing port at the end of the Aleutian Chain. Although the Alaska Ocean’s home port is now Seattle (it was formerly Anacortes, Washington), Dutch Harbor serves as the vessel’s home base during the months it operates in the Bering Sea.
The 125-person crew of the Alaska Ocean is at sea for several weeks at a time, and they look forward to reaching Dutch Harbor where they unload the frozen fish products and resupply the ship. The captain and crew can take care of personal business while in port as well, and stores like Alaska Ship Supply cater to their needs by selling clothing, supplies, marine hardware, groceries, postage, and other items.
The Alaska Ocean is a 376-foot-long vessel in the Seattle-based catcher-processor fleet. Workers catch, process, package, and freeze groundfish—mostly pollock and Pacific whiting—in the Bering Sea and in the waters off the coast of the Pacific Northwest. The vessel can harvest about 325 metric tons of fish per day and can freeze over 250,000 pounds of fish product daily.
The process of setting and hauling in the huge nets aboard factory trawlers can be dangerous, and safety measures are followed to minimize the risk of injury or loss of life. When working on the fish deck, the deckhands wear personal flotation devices, or PFDs, over their clothing.
This vest is Type III, U.S. Coast Guard approved PFD, and is appropriate for calm waters, or where the chance for a quick rescue is high. It was worn in such conditions by a deckhand working aboard the catcher-processor Alaska Ocean in the North Pacific about 50 miles west of Seattle in June 2007.
Made of bright orange nylon, the vest has the required reflective panels and a battery-operated light to aid would-be rescuers. While the life vest would provide its wearer flotation, it would not protect a person overboard in cold or rough waters for long. The vessel carries immersion suits for everyone aboard and conducts regular safety drills at which people from all areas of the ship practice putting on the suits quickly.
The Alaska Ocean itself is a 376-foot-long vessel in the Seattle-based catcher-processor fleet. Workers catch, process, package, and freeze groundfish—mostly pollock and Pacific whiting—in the Bering Sea and in the waters off the coast of the Pacific Northwest.
Deckhands who work aboard factory trawlers in the Bering Sea and North Pacific are exposed to extremely cold, wet, and sometimes dangerous conditions. They wear protective gear such as hard hats, boots, and waterproof clothing, including heavy-duty vinyl work gloves.
These gloves, worn by a fisherman on the catcher-processor Alaska Ocean in 2007, are personalized with a phrase chosen by their owner, a common practice employed for identifying one’s own gear at a moment’s notice. The words “FISH ON ROCK,” appearing on both gloves, were this man's personal choice, their exact meaning known only to him.
While the sleeves of these gloves are long for tucking in the sleeves of other garments, the deck hands often fold the glove sleeves to fit around their wrists when working in relatively warm, dry conditions.
The Alaska Ocean is a 376-foot-long vessel in the Seattle-based catcher-processor fleet. Workers catch, process, package, and freeze groundfish—mostly pollock and Pacific whiting—in the Bering Sea and in the waters off the coast of the Pacific Northwest.
Alarm Clock by Rube Goldberg, circa 1970. This non-working, sculpted model signed by Rube Goldberg was crafted [during the 1960s] to replicate a cartoon from the series The Inventions of Professor Lucifer Gorgonzola Butts that he drew for between 1914 and 1964.
Inscription: At 6 a.m. garbage man picks up ashcan, causing mule to kick over statue of Indian warrior. Arrow punctures bucket and ice cubes fall on false teeth, causing them to chatter and nip elephant's tail. Elephant raises his trunk in pain, pressing lever which starts toy maestro to lead quartet in sad song. Sentimental girl breaks down and cries into flower pot, causing flower to grow and tickle man's feet. He rocks with laughter, starting machine that rings gong and slides sleeper out of bed into slippers on wheels, which propel him into bathroom where cold shower really wakes him up.
The brown cotton trousers shown here were made by Levi Strauss & Co. of San Francisco, California sometime during the two decades after the company's founding in 1873. Levi Strauss was a 24-year old, newly minted American citizen from Bavaria when he set sail for San Francisco in 1853 to open a branch of his brother's New York City dry-goods business. He prospered by supplying blankets, handkerchiefs, and clothing to merchants in the West for the next two decades. In 1872, he received a business proposition from Jacob Davis, a Latvian-born tailor in Reno, Nevada. Davis had invented a way to strengthen trousers by reinforcing their pocket openings with copper rivets in order to help a customer who complained about his constantly torn pockets. He asked Levi Strauss to join him in patenting the process; then they would go into business together to sell their patented riveted pants.
Patent number 139,121 was granted on 20 May 1873, and production began immediately. The printed leather label at the center back waistband of these "waist overalls," as they were known in the late nineteenth century, suggests that the product was instantly popular with hard-working men who needed indestructible trousers. The label proclaims "Levi Strauss & Co." of "14 & 16 Battery Street SAN FRANCISCO, CAL. " to be the "Sole Proprietors and Manufacturers" of "PATENT RIVETED DUCK & DENIM CLOTHING. . . EVERY PAIR GUARANTEED. None Genuine Unless Bearing This Label. Any infringement on this Patent will be prosecuted to the fullest extent of the law. LABEL COPYRIGHTED."
The company's patent expired in 1890, but the popularity of their riveted trousers became an American legend. Iron-clad cotton "duck" canvas (mentioned on the label, and seen in this pair of pants) was gradually phased out in favor of flexible cotton denim, a fabric that was much like the twilled cotton "jean" that had long been used for men's work clothes. By 1960, Levi's had come to be called "jeans" in both corporate advertising and the public's imagination.
Made of a heavy cotton canvas known as "duck," the pants feature a pair of short tapered belts with a buckle to cinch the back waist yoke, and white top-stitching everywhere except along the outside leg seams below the two front pockets. A small watch pocket is set inside the right front pocket, and a single back patch pocket with Levi's now-famous double arcuate stitching is placed on the right hip. A printed leather label is centered on the back waistband.
The patented copper rivets that reinforced the upper corners of each pocket and the base of the fly set these trousers apart from all other work clothing of their day. Each rivet is inscribed "L. S. & CO. S. F. PAT. MAY 1873." The pants were fastened and supported by four-hole metal buttons; the two buttons hidden in the concealed fly are unmarked, but the rims of the one at the front waist, and the six suspender buttons around the waistband, are marked "LEVI STRAUSS & CO. S. F. CAL."
This presidential campaign medal was made by the Scovill Manufacturing Company of Waterbury, Connecticut around 1868. The Scovill Company was established in 1802 as a button manufacturer that is still in business today. Scovill was an early industrial American innovator, adapting armory manufacturing processes to mass-produce a variety of consumer goods including buttons, daguerreotype mats, and campaign badges.
Obverse: Bust of Ulysses S. Grant facing right. The legend reads: GENERAL U. S. GRANT.
Reverse: Legend that reads: GENERAL U. S. GRANT REPUBLICAN CANDIDATE FOR PRESIDENT. 1868.
This presidential campaign medal was made by the Scovill Manufacturing Company of Waterbury, Connecticut around 1868. The Scovill Company was established in 1802 as a button manufacturer, and is still in business today. Scovill was an early industrial American innovator, adapting armory manufacturing processes to mass-produce a variety of consumer goods including buttons, daguerreotype mats, and campaign badges.
Obverse: Bust of Ulysses S. Grant facing right. Legend reads: GENERAL U. S. GRANT.
Reverse: Legend reads: GENERAL U. S. GRANT REPUBLICAN CANDIDATE FOR PRESIDENT 1868.
This presidential campaign medal was made by the Scovill Manufacturing Company of Waterbury, Connecticut around 1864. The Scovill Company was established in 1802 as a button manufacturer, and is still in business today. Scovill was an early industrial American innovator, adapting armory manufacturing processes to mass-produce a variety of consumer goods including campaign badges.
Obverse: Bust of George B. McClellan facing forward. Legend reads, MAJ. GEN. GEO. B. McCLELLAN, U.S.A.
Reverse: Eagle with a ribbon that reads “E Pluribus Unum” perched on the shield of the United States with the American flag is draped across a spear. The legend reads: MY COUNTRY I AM SWORN TO DEFEND.
This presidential campaign medal was made by the Scovill Manufacturing Company of Waterbury, Connecticut around 1847. The Scovill Company was established in 1802 as a button manufacturer that is still in business today. Scovill was an early industrial American innovator, adapting armory manufacturing processes to mass-produce a variety of consumer goods including campaign medals.
Obverse: Bust of Zachary Taylor facing forward. Legend reads: MAJOR ZACHARY TAYLOR/ HERO OF PALO ALTO, RESACA DE LA PALMA, MONTEREY AND BUENA VISTA. 1847.
Reverse: Eagle with shield carrying an olive branch and three arrows. Legend reads: UNITED STATES OF AMERICA 1847.
This presidential campaign medal was made by the Scovill Manufacturing Company of Waterbury, Connecticut around 1868. The Scovill Company was established in 1802 as a button manufacturer that is still in business today. Scovill was an early industrial American innovator, adapting armory manufacturing processes to mass-produce a variety of consumer goods including campaign medals.
Obverse: Bust of Ulysses S. Grant facing left. Legend: GRANT & COLFAX REPUBLICAN CANDIDATES 1868.
Reverse: Two branches rim the edge, with two crossed flags, a drum, and bayoneted rifles at the base of the branches. Legend: FIRST IN THE HEARTS OF HIS SOLDIERS.
This presidential campaign medal was made by the Scovill Manufacturing Company of Waterbury, Connecticut around 1841. The Scovill Company was established in 1802 as a button manufacturer and is still in business today. Scovill was an early industrial American innovator, adapting armory manufacturing processes to mass-produce a variety of consumer goods including buttons, daguerreotype mats, and campaign medals.
Obverse: Bust of William Henry Harrison facing left. The legend reads: MAJ. GENl W. HARRISON BORN FEB. 9. 1773.
Reverse: Image of a log cabin, with a legend that reads: THE PEOPLE’S CHOICE IN THE YEAR 1841.
This campaign medal was made by the Scovill Manufacturing Company of Waterbury, Connecticut around 1868. The Scovill Company was established in 1802 as a button manufacturer, and is still in business today. Scovill was an early industrial American innovator, adapting armory manufacturing processes to mass-produce a variety of consumer goods like campaign medals. This medal has a quote issued by Grant during the Overland Campaign of the Civil War.
Obverse: Bust of Ulysses S. Grant facing forward, the legend reads: GENERAL U.S. GRANT.
Reverse: Legend reads: I PROPOSE TO FIGHT IT OUT ON THIS LINE IF IT TAKES ALL SUMMER.
This campaign medal was made by the Scovill Manufacturing Company of Waterbury, Connecticut around 1852. The Scovill Company was established in 1802 as a button manufacturer that is still in business today. Scovill was an early industrial American innovator, adapting armory manufacturing processes to mass-produce a variety of consumer goods including campaign medals. The medal is holed in the top so it could be worn.
Obverse: Bust of Franklin Pierce facing right. Legend reads: GEN FRANK PIERCE THE STATESMAN & SOLDIER.
Reverse: Legend reads: FOR PRESIDENT GEN. FRANK PIERCE OF NEW HAMPSHIRE, FOR VICE PRESIDENT WILLIAM R. KING OF ALABAMA.
This presidential campaign medal was made by the Scovill Manufacturing Company of Waterbury, Connecticut around 1864. The Scovill Company was established in 1802 as a button manufacturer that is still in business today. Scovill was an early industrial American innovator, adapting armory manufacturing processes to mass-produce a variety of consumer goods including buttons, daguerreotype mats, and campaign badges.
Obverse: Bust of George B. McClellan facing forward. The legend reads: MAJ. GENERAL McCLELLAN. Reverse: Eagle clutching arrows and an olive branch, encircled with 34 stars and a wreath. The legend reads: ONE FLAG AND ONE UNION NOW AND FOREVER.
This presidential campaign medal was made by the Scovill Manufacturing Company of Waterbury, Connecticut around 1868. The Scovill Company was established in 1802 as a button manufacturer, and is still in business today. Scovill was an early industrial American innovator, adapting armory manufacturing processes to mass-produce a variety of consumer goods including buttons, daguerreotype mats, and campaign badges.
Obverse: Bust of Ulysses S. Grant facing forward, the legend reads: GENERAL U. S. GRANT 1868.
Reverse: Bust of Schuyler Colfax facing forward, the legend reads: SCHUYLER COLFAX 1868.
This presidential campaign medal was made by the Scovill Manufacturing Company of Waterbury, Connecticut around 1868. The Scovill Company was established in 1802 as a button manufacturer that is still in business today. Scovill was an early industrial American innovator, adapting armory manufacturing processes to mass-produce a variety of consumer goods including buttons, daguerreotype mats, and campaign badges.
Obverse: Bust of Ulysses S. Grant facing right. The legend reads: GENERAL U. S. GRANT 1868.
Reverse: Bust of Schuyler Colfax facing left. The legend reads: SCHUYLER COLFAX 1868 (the 1868 is worn down).
This presidential campaign medal was made by the Scovill Manufacturing Company of Waterbury, Connecticut around 1840. The Scovill Company was established in 1802 as a button manufacturer that is still in business today. Scovill was an early industrial American innovator, adapting armory manufacturing processes to mass-produce a variety of consumer goods including buttons, daguerreotype mats, and campaign medals.
Obverse: Bust of William Henry Harrison facing left. The legend reads: MAJ. GENl W. HARRISON BORN FEB. 9. 1773.
Reverse: Image of a log cabin, with a legend that reads: THE PEOPLE’S CHOICE IN THE YEAR 1840.
This presidential campaign medal was made by the Scovill Manufacturing Company of Waterbury, Connecticut around 1864. The Scovill Company was established in 1802 as a button manufacturer, and is still in business today. Scovill was an early industrial American innovator, adapting armory manufacturing processes to mass-produce a variety of consumer goods including buttons, daguerreotype mats, and campaign badges.
Obverse: Bust of George B. McClellan facing left, surrounded by a wreath. Legend reads: MAJ. GEN. GEO. B. McCLELLAN.
Reverse: Image of a shield that is surrounded by flags and a “liberty cap.” Legend reads: THE PEOPLES CHOICE FOR PRESIDENT 1864.