Natural Resources

Alaska Ocean Coveralls

Description

Fish processors, laboratory staff, inspectors, supervisors, and others who work in the factory aboard the Alaska Ocean wear royal blue coveralls like these when on duty. These polyester coveralls are worn over other clothing to maintain standards of hygiene in the factory. Some processors change their coveralls several times during their daily 12-hour shift, which can extend to kicker shifts of an additional three hours. Because clean coveralls are always in demand, the factory’s laundry crew keeps the industrial washers and dryers running continuously. The coveralls, with the words Alaska Ocean emblazoned across the back, zip up the front and are typically worn tucked into boots.

date made

2006

Associated Date

2007

used

McFarland, Thelma

maker

Fristads

ID Number

2007.0178.20

catalog number

2007.0178.20

accession number

2007.0178

Data Source

National Museum of American History

Block Pan for Freezing Fish

Description

This shallow, metal pan was used for freezing processed fish aboard the factory trawler Alaska Ocean. Operating in the North Pacific and the Bering Sea, the Alaska Ocean is one vessel in the fleet that catches and processes pollock, hake, and whiting.

In the factory the fish are gutted and filleted by German-made filleting machines, which can be calibrated to remove the bones and skin according to a customer’s preference. Onboard engineers adjust the angles of the knives within a quarter of a millimeter to provide a product with a small amount of fat, or no fat at all, depending on the customer’s specifications.

After the initial filleting, workers in the factory load pans like this with fish fillets, fish roe, or minced fish. A conveyor belt carries the filled pans to other workers who load them into plate freezers. After about two hours, when the freezing is complete, the pans are unloaded from the freezer, and the blocks of frozen fish are removed and packed for shipment. The packed blocks of product are stacked in the ship’s large freezer hold until they can be offloaded ashore.

The Alaska Ocean carries two sizes of pans, a block pan like this and a slightly larger size for surimi, a type of fish paste used in making imitation crabmeat. The vessel carries a total of 2800 pans, 1400 of each size. The factory has 16 plate freezers aboard, 8 for single pans and 8 for doubles. A single-pan plate freezer can hold 102 surimi pans and 119 block pans at a time.

The wax lining in this pan facilitates removing the frozen product. This one is marked “M” for mince, a ground fish product used in making fish sticks and fish fingers.

date made

2000-2005

Associated Date

2007

ID Number

2007.0178.29

catalog number

2007.0178.29

accession number

2007.0178

Data Source

National Museum of American History

Factory Processor’s Apron

Description

This vinyl bib apron was worn by fish processor Thelma McFarland over her coveralls and rain pants during her work shifts aboard the factory trawler Alaska Ocean in the summer of 2007. Processors like McFarland stand at long tables or conveyor belts and encounter considerable water and fish parts as they work. Processors typically wear aprons of one sort of another for protection.

Although the on-board laundry crew takes care of cleaning workers’ coveralls, rain pants, gloves, and plastic sleeves, each worker is responsible for cleaning his or her apron. McFarland, who is about 5 feet tall, adjusted her apron to suit her small frame by cutting off the lower portion. She also personalized it by writing her name in permanent marker across the bib.

date made

2007

used

2007

used

McFarland, Thelma

ID Number

2007.0178.18

catalog number

2007.0178.18

accession number

2007.0178

Data Source

National Museum of American History

Factory Processor’s Gloves

Description

Despite automation of basic fish processing functions like gutting and filleting, there is still a lot of handwork to be done aboard a factory trawler like the Alaska Ocean. And work around cold water, fresh fish, and heavy machinery means that gloves are a crucial part of a factory worker’s outfit.

These heavy vinyl gloves were worn by a female fish processor during the summer fishing season in 2007. An estimated 1200 to 1400 pairs of these gloves were being used, cleaned, and reused aboard the Alaska Ocean in 2007.

In addition to these heavy work gloves, the onboard laundry operation oversaw the distribution of 5,000 pairs of lighter rubber gloves, 800 pairs of cotton gloves, and 1200 pairs of wool gloves. The crew working in the freezer hold, known as the “pain cave,” wore thick, insulated gloves, and lab workers used disposable gloves when conducting tests on products for quality control.

date made

2007

worn

2007

ID Number

2007.0178.16

catalog number

2007.0178.16

accession number

2007.0178

Data Source

National Museum of American History

Factory Processor’s Rain Pants

Description

Fish processors aboard trawlers like the Alaska Ocean wear waterproof pants over their coveralls and other clothing to protect themselves from the water and fish slime that are constant companions in the factory. This pair is dark blue, the same as those worn by deck hands. These pants are small and were worn by processor Thelma McFarland in the summer 2007 season.

date made

2007

used

2007

used

McFarland, Thelma

maker

Helly Hansen

ID Number

2007.0178.21

catalog number

2007.0178.21

accession number

2007.0178

Data Source

National Museum of American History

Factory Processor’s Boots

Description

These non-slip, waterproof boots were worn by Thelma McFarland, a fish processor working aboard the Alaska Ocean factory trawler in the summer of 2007. Manufactured in the USA, these “Xtratuf” boots are made of neoprene, a synthetic rubber.

Processors work 12-hour shifts and, if the factory is busy, they may work an additional 3 hours, called a kicker shift. For most of this time, the workers are on their feet, standing at processing tables or conveyor belts, or walking from one station to another on grated walkways. These walkways, like the areas around the equipment where processors stand to work, are raised above the floor, allowing the water used in factory operations to run beneath the workers’ feet. Despite being elevated above any water flow, it is still essential for workers to wear non-slip, waterproof boots to keep their feet warm and dry.

These boots are identical to those worn by deck hands. Most of the specialized clothing worn by workers and crew aboard the Alaska Ocean is provided by the company. Boots, however, are purchased by individuals, and are available in the on-board store. Felt insoles for the boots are available in the laundry and are washed frequently by laundry staff.

date made

2007

used

2007

used

McFarland, Thelma

maker

Norcross Safety Products, L. L. C.

ID Number

2007.0178.17

catalog number

2007.0178.17

accession number

2007.0178

Data Source

National Museum of American History

Factory Processor’s Bump Hat

Description

The factory inside a large trawler like the Alaska Ocean is filled with equipment for filleting, processing, freezing, and packing enormous quantities of fish. Workers are trained in safety procedures and also wear protective headgear and earplugs as they work. While not required to wear certified safety helmets like the fishermen on the weather deck, they wear bump hats molded from high-density polyethylene for protection from minor bumps and bruises.

This yellow bump hat was worn by Thelma McFarland, a fish processor, who was working her third season aboard the Alaska Ocean in 2007. She wore it over a disposable hairnet, which covered and held her hair in place, a requirement for maintaining sanitary conditions in the factory. There are typically four factory shifts, and the bump hats are color-coded according to each shift—blue for A, yellow for B, green for C, and orange for D shift. The color-coding allows managers to quickly assess the number of workers that will be needed on extra kicker shifts. The lead managers in each area wear red bump hats.

date made

2007

Associated Date

2007

used

McFarland, Thelma

maker

Bullard

ID Number

2007.0178.13

catalog number

2007.0178.13

accession number

2007.0178

Data Source

National Museum of American History

Fisherman’s Boots

Description

Deck hands working aboard most commercial fishing vessels require protective clothing from head to toe. Non-slip, waterproof footwear is essential, and on the Alaska Ocean factory trawler, the deck hands, as well as the people who work in the factory, wear “Xtratuf” boots. Manufactured in the United States, these neoprene boots are made for “severe fishing, farm, and work conditions.” This pair was worn by a deck hand aboard the Alaska Ocean in summer of 2007.

date made

2007

2006-2007

Associated Date

2007

maker

Norcross Safety Products, L. L. C.

ID Number

2007.0178.01

accession number

2007.0178

catalog number

2007.0178

Data Source

National Museum of American History

Fisherman’s Hard Hat

Description

The weather deck on a factory trawler like the Alaska Ocean can be a dangerous place, especially when the huge net is being launched or hauled aboard. While mechanical winches do the heavy lifting, deck hands have to be present during such operations to attach or change cables, to secure or launch the trawl doors, to open the cod end of the net into the fish bins in the hold, and to accomplish a range of other tasks accurately and efficiently. To protect themselves while working on the deck, fishermen wear hard hats, earplugs, and other gear.

This hard hat was worn by Alaska Ocean deck hand Matt Prebezac in 2007. Like other fishermen aboard, he customized the standard white hard hat so there would be no confusion over which hat to grab when the call came to report to the deck. Using a black permanent marker, he wrote the words “Rock Star” on the back of the hat. This ensured it wouldn’t be mistaken for his buddy Ben Boyok’s hat, which was adorned with the profile of a hawkeye, the team mascot of the University of Iowa, in Ben’s home state. Throughout the 2007 season, the Rock Star and the Iowa hawkeye, with four other deck hands, a lead fisherman, and a deck officer, worked 12-hour shifts in two teams.

date made

2007

Associated Date

2007

used

Prebezac, Matt

maker

Bullard

ID Number

2007.0178.02

catalog number

2007.0178.02

accession number

2007.0178

Data Source

National Museum of American History

Protective Sleeves

Description

These vinyl sleeves are worn from the wrist to just above the elbow by people working in the factory aboard the trawler Alaska Ocean. Worn tucked into work gloves, the sleeves help keep a worker’s forearms dry. The company supplies such sleeves, which are cleaned frequently and reused. An estimated 200 pairs of sleeves were stocked aboard the Alaska Ocean during the 2007 season. The Alaska Ocean operates in the North Pacific and the Bering Sea.

date made

2007

Associated Date

2007

maker

Grundens

ID Number

2007.0178.15

catalog number

2007.0178.15

accession number

2007.0178

Data Source

National Museum of American History