Natural Resources

Alaska Ocean Coveralls

Description

Fish processors, laboratory staff, inspectors, supervisors, and others who work in the factory aboard the Alaska Ocean wear royal blue coveralls like these when on duty. These polyester coveralls are worn over other clothing to maintain standards of hygiene in the factory. Some processors change their coveralls several times during their daily 12-hour shift, which can extend to kicker shifts of an additional three hours. Because clean coveralls are always in demand, the factory’s laundry crew keeps the industrial washers and dryers running continuously. The coveralls, with the words Alaska Ocean emblazoned across the back, zip up the front and are typically worn tucked into boots.

date made

2006

Associated Date

2007

used

McFarland, Thelma

maker

Fristads

ID Number

2007.0178.20

catalog number

2007.0178.20

accession number

2007.0178

Data Source

National Museum of American History

Fisherman’s Work Gloves

Description

Deckhands who work aboard factory trawlers in the Bering Sea and North Pacific are exposed to extremely cold, wet, and sometimes dangerous conditions. They wear protective gear such as hard hats, boots, and waterproof clothing, including heavy-duty vinyl work gloves.

These gloves, worn by a fisherman on the catcher-processor Alaska Ocean in 2007, are personalized with a phrase chosen by their owner, a common practice employed for identifying one’s own gear at a moment’s notice. The words “FISH ON ROCK,” appearing on both gloves, were this man's personal choice, their exact meaning known only to him.

While the sleeves of these gloves are long for tucking in the sleeves of other garments, the deck hands often fold the glove sleeves to fit around their wrists when working in relatively warm, dry conditions.

The Alaska Ocean is a 376-foot-long vessel in the Seattle-based catcher-processor fleet. Workers catch, process, package, and freeze groundfish—mostly pollock and Pacific whiting—in the Bering Sea and in the waters off the coast of the Pacific Northwest.

date made

ca 2007

maker

Showa Co.

ID Number

2007.0178.07

catalog number

2007.0178.07

accession number

2007.0178

Data Source

National Museum of American History

Factory Processor’s Apron

Description

This vinyl bib apron was worn by fish processor Thelma McFarland over her coveralls and rain pants during her work shifts aboard the factory trawler Alaska Ocean in the summer of 2007. Processors like McFarland stand at long tables or conveyor belts and encounter considerable water and fish parts as they work. Processors typically wear aprons of one sort of another for protection.

Although the on-board laundry crew takes care of cleaning workers’ coveralls, rain pants, gloves, and plastic sleeves, each worker is responsible for cleaning his or her apron. McFarland, who is about 5 feet tall, adjusted her apron to suit her small frame by cutting off the lower portion. She also personalized it by writing her name in permanent marker across the bib.

date made

2007

used

2007

used

McFarland, Thelma

ID Number

2007.0178.18

catalog number

2007.0178.18

accession number

2007.0178

Data Source

National Museum of American History

Factory Processor’s Gloves

Description

Despite automation of basic fish processing functions like gutting and filleting, there is still a lot of handwork to be done aboard a factory trawler like the Alaska Ocean. And work around cold water, fresh fish, and heavy machinery means that gloves are a crucial part of a factory worker’s outfit.

These heavy vinyl gloves were worn by a female fish processor during the summer fishing season in 2007. An estimated 1200 to 1400 pairs of these gloves were being used, cleaned, and reused aboard the Alaska Ocean in 2007.

In addition to these heavy work gloves, the onboard laundry operation oversaw the distribution of 5,000 pairs of lighter rubber gloves, 800 pairs of cotton gloves, and 1200 pairs of wool gloves. The crew working in the freezer hold, known as the “pain cave,” wore thick, insulated gloves, and lab workers used disposable gloves when conducting tests on products for quality control.

date made

2007

worn

2007

ID Number

2007.0178.16

catalog number

2007.0178.16

accession number

2007.0178

Data Source

National Museum of American History

Factory Processor’s Rain Pants

Description

Fish processors aboard trawlers like the Alaska Ocean wear waterproof pants over their coveralls and other clothing to protect themselves from the water and fish slime that are constant companions in the factory. This pair is dark blue, the same as those worn by deck hands. These pants are small and were worn by processor Thelma McFarland in the summer 2007 season.

date made

2007

used

2007

used

McFarland, Thelma

maker

Helly Hansen

ID Number

2007.0178.21

catalog number

2007.0178.21

accession number

2007.0178

Data Source

National Museum of American History

Factory Processor’s Boots

Description

These non-slip, waterproof boots were worn by Thelma McFarland, a fish processor working aboard the Alaska Ocean factory trawler in the summer of 2007. Manufactured in the USA, these “Xtratuf” boots are made of neoprene, a synthetic rubber.

Processors work 12-hour shifts and, if the factory is busy, they may work an additional 3 hours, called a kicker shift. For most of this time, the workers are on their feet, standing at processing tables or conveyor belts, or walking from one station to another on grated walkways. These walkways, like the areas around the equipment where processors stand to work, are raised above the floor, allowing the water used in factory operations to run beneath the workers’ feet. Despite being elevated above any water flow, it is still essential for workers to wear non-slip, waterproof boots to keep their feet warm and dry.

These boots are identical to those worn by deck hands. Most of the specialized clothing worn by workers and crew aboard the Alaska Ocean is provided by the company. Boots, however, are purchased by individuals, and are available in the on-board store. Felt insoles for the boots are available in the laundry and are washed frequently by laundry staff.

date made

2007

used

2007

used

McFarland, Thelma

maker

Norcross Safety Products, L. L. C.

ID Number

2007.0178.17

catalog number

2007.0178.17

accession number

2007.0178

Data Source

National Museum of American History

Factory Processor’s Bump Hat

Description

The factory inside a large trawler like the Alaska Ocean is filled with equipment for filleting, processing, freezing, and packing enormous quantities of fish. Workers are trained in safety procedures and also wear protective headgear and earplugs as they work. While not required to wear certified safety helmets like the fishermen on the weather deck, they wear bump hats molded from high-density polyethylene for protection from minor bumps and bruises.

This yellow bump hat was worn by Thelma McFarland, a fish processor, who was working her third season aboard the Alaska Ocean in 2007. She wore it over a disposable hairnet, which covered and held her hair in place, a requirement for maintaining sanitary conditions in the factory. There are typically four factory shifts, and the bump hats are color-coded according to each shift—blue for A, yellow for B, green for C, and orange for D shift. The color-coding allows managers to quickly assess the number of workers that will be needed on extra kicker shifts. The lead managers in each area wear red bump hats.

date made

2007

Associated Date

2007

used

McFarland, Thelma

maker

Bullard

ID Number

2007.0178.13

catalog number

2007.0178.13

accession number

2007.0178

Data Source

National Museum of American History

Fisherman’s Life Vest

Description

The process of setting and hauling in the huge nets aboard factory trawlers can be dangerous, and safety measures are followed to minimize the risk of injury or loss of life. When working on the fish deck, the deckhands wear personal flotation devices, or PFDs, over their clothing.

This vest is Type III, U.S. Coast Guard approved PFD, and is appropriate for calm waters, or where the chance for a quick rescue is high. It was worn in such conditions by a deckhand working aboard the catcher-processor Alaska Ocean in the North Pacific about 50 miles west of Seattle in June 2007.

Made of bright orange nylon, the vest has the required reflective panels and a battery-operated light to aid would-be rescuers. While the life vest would provide its wearer flotation, it would not protect a person overboard in cold or rough waters for long. The vessel carries immersion suits for everyone aboard and conducts regular safety drills at which people from all areas of the ship practice putting on the suits quickly.

The Alaska Ocean itself is a 376-foot-long vessel in the Seattle-based catcher-processor fleet. Workers catch, process, package, and freeze groundfish—mostly pollock and Pacific whiting—in the Bering Sea and in the waters off the coast of the Pacific Northwest.

date made

ca 2007

maker

Stearns

ID Number

2007.0178.08

catalog number

2007.0178.08

accession number

2007.0178

Data Source

National Museum of American History

Fisherman’s Knife

Description

A good, sharp knife is an essential tool for fishermen working on the fish deck of a catcher-processor. Aboard the Alaska Ocean, each deckhand carries a “Vicky,” shorthand for a Victorinox knife. This example is 7.5 inches long, including the handle. It is used for mending nets, cutting lines, and for general duties like cutting up cardboard for the on-board incinerator. The holder for this knife has weathered a lot of use, evidenced by the tape repairs.

In a June 2007 interview with deck boss Brent Walter (who was in his twelfth year working on the Alaska Ocean) and deckhands Ben Boyok and Matt Prebezac (who had been with the Alaska Ocean for seven years and two years, respectively), they agreed that net repair was the hardest part of the job. The main difficulty involves learning to conceptualize the repair. Because the net mesh is so huge, it takes time and experience to understand how to make the repair correctly. At the time, the Alaska Ocean was fishing in waters about 50 miles off the coast of Washington State and using a mid-water trawl. Repairs to the nets were minimal. The deckhands expected to do more net repair later in the season when the vessel moved to the Bering Sea, where the nets get torn from bottom-fishing.

The Alaska Ocean is a 376-foot-long vessel in the Seattle-based catcher-processor fleet. Workers catch, process, package, and freeze groundfish—mostly pollock and Pacific whiting—in the Bering Sea and in the waters off the coast of the Pacific Northwest.

date made

ca 2007

maker

Victorinox Swiss Army

ID Number

2007.0178.03

catalog number

2007.0178.03

accession number

2007.0178

Data Source

National Museum of American History

Fanny Pack

Description

Machinery noise on the fish deck can be deafening, and voices can get lost, no matter how loud. To make sure a message gets communicated and received, the deckhands carry radio microphones, and the fanny pack is the preferred way of keeping the instrument at hand but protected from water, dirt, and slime.

This black nylon fanny pack was worn by a deckhand working aboard the catcher-processor Alaska Ocean in the summer of 2007. He used the radio, along with a microphone clipped to his life vest for communicating with the wheelhouse and other deckhands.

The Alaska Ocean is a 376-foot-long vessel in the Seattle-based catcher-processor fleet. Workers catch, process, package, and freeze groundfish—mostly pollock and Pacific whiting—in the Bering Sea and in the waters off the coast of the Pacific Northwest.

date made

ca 2007

maker

REI

ID Number

2007.0178.04

catalog number

2007.0178.04

accession number

2007.0178

Data Source

National Museum of American History

Fisherman’s Sweatshirt

Description

This heavyweight, extra-large hooded sweatshirt was worn by one of the deck hands working aboard the Alaska Ocean catcher-processer in 2007. It features the logo of the Alaska Ship Supply store in Dutch Harbor, Alaska, a major commercial fishing port at the end of the Aleutian Chain. Although the Alaska Ocean’s home port is now Seattle (it was formerly Anacortes, Washington), Dutch Harbor serves as the vessel’s home base during the months it operates in the Bering Sea.

The 125-person crew of the Alaska Ocean is at sea for several weeks at a time, and they look forward to reaching Dutch Harbor where they unload the frozen fish products and resupply the ship. The captain and crew can take care of personal business while in port as well, and stores like Alaska Ship Supply cater to their needs by selling clothing, supplies, marine hardware, groceries, postage, and other items.

The Alaska Ocean is a 376-foot-long vessel in the Seattle-based catcher-processor fleet. Workers catch, process, package, and freeze groundfish—mostly pollock and Pacific whiting—in the Bering Sea and in the waters off the coast of the Pacific Northwest. The vessel can harvest about 325 metric tons of fish per day and can freeze over 250,000 pounds of fish product daily.

date made

ca 2007

maker

Alaska Ship Supply

ID Number

2007.0178.06

catalog number

2007.0178.06

accession number

2007.0178

Data Source

National Museum of American History

Protective Sleeves

Description

These vinyl sleeves are worn from the wrist to just above the elbow by people working in the factory aboard the trawler Alaska Ocean. Worn tucked into work gloves, the sleeves help keep a worker’s forearms dry. The company supplies such sleeves, which are cleaned frequently and reused. An estimated 200 pairs of sleeves were stocked aboard the Alaska Ocean during the 2007 season. The Alaska Ocean operates in the North Pacific and the Bering Sea.

date made

2007

Associated Date

2007

maker

Grundens

ID Number

2007.0178.15

catalog number

2007.0178.15

accession number

2007.0178

Data Source

National Museum of American History